Product Safety Information - Thermo Scientific BF51841C Operation Manual

Safety Notes

Product Safety Information

Inert Fillers and Organic Binders**
Remaining components not
determined hazardous
and/or hazardous compo-
nents present at less than
1.0% (0.1% for carcino-
gens)
*Pending the results of long-term health effects studies, airborne exposures
should be controlled at or below the recommended industry exposure guidelines
listed above.
**Identity, CAS Numbers and/or percent composition are trade secrets.
As of the date of preparation of this document, the foregoing information is
believed to be accurate and is provided in good faith to comply with applicable
Federal and State laws. However, no warranty or representation, expressed or
implied, is made as to the accuracy or completeness of the foregoing data.
Product Safety Information
Refractory Ceramic Fibre Product
This product contains refractory ceramic fibers which have been identified by the
International Agency for Research on Cancer (IARC) as possibly carcinogenic to
humans.
Avoid breathing fiber particulates and dust.
RISKS:
• Possible cancer hazard by inhalation
• May cause temporary irritation to eyes, skin, and respiratory tract
PRECAUTIONARY MEASURES:
• Minimize airborne fibers with engineering controls.
• Use NIOSH/MSHA approved respiratory as required (see MSDS).
• Wear long sleeved, loose-fitting clothing, eye protection, and gloves
1-10
N/A
This product contains refractory ceramic fibers which have been
identified by the International Agency for Research on Cancer
(IARC) as possibly carcinogenic to humans.
N/A
Trace N/A
Thermo Scientific