Set Group Programs to "OFF"
In the following example, the "Pool" group's set of scheduled programs will be set from
"ON" to "OFF".
The schedules will not resume until the programs are set back to "ON".
Enter "Schedules" menus, then proceed
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
PRESS "ENTER"
C
ARROWS TO
3
"PROGRAM MODE"
ENTER TO SAVE
6
1.9 External Equipment
PRESS MENU
A
BUTTON
ARROWS TO
1
"POOL GROUP"
ENTER TO EDIT
4
MENU TO EXIT, PRESS
& HOLD TO STATUS
IN THIS SECTION:
1.9.a PoolSync®
1.9.b Operating Heat Pump (With an External Controller)
1.9.c Operating Heat Pump (With an External Flow Switch)
1.9.d Operating Multiple Connected Heat Pumps
USE ARROWS TO
B
"SCHEDULES"
ENTER TO EDIT
2
ARROWS TO
5
"OFF"
28
29
29
29
Page - 27