Setting Entry Code Option - Aquacal TropiCal T170 Operation Manual

1.8.d Setting Entry Code Option
The entry code feature can prevent unauthorized access to the heat pump adjustments. This feature initiates
after the heat pump goes into the sleep mode for the first time. This feature is commonly used on commercial
applications.
NOTICE
Before enabling the entry code feature, be sure to record the code. If lost, the heat pump will require a
l
program reset to regain access. This reset may require additional configuration by the installer.
PLEASE NOTE -
A heat pump requesting an entry code is different than the control panel's sleep mode. (See
"
Wake Up Heat Pump
Enter "System" menus, then proceed
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
PRESS "ENTER"
C
USE ARROWS TO
3
CHANGE
ENTER TO EDIT
6
MENU TO EXIT, PRESS
& HOLD TO STATUS
Failure to heed the following may result in damage to equipment.
" on page 3 for more information.)
PRESS MENU
A
BUTTON
USE ARROWS TO MENU
1
"USER ENTRY CODE"
ENTER TO SAVE
4
USE ARROWS TO
7
CHANGE
USE ARROWS TO
B
"SYSTEM"
ENTER TO EDIT
2
USE ARROWS TO MENU
5
"USER CODE ENABLED"
ENTER TO SAVE
8
Page - 13