How To Connect - BIXOLON SRP-F310 User Manual

2. How to Connect

Both Ethernet and WLAN can be configured through the printer's Ethernet interface.
Likewise, both Ethernet and WLAN can also be configured though the printer's WLAN
interface. When you want to change the Ethernet or WLAN of the printer, the network
settings of the host (PC, PDA, etc) and Ethernet or WLAN of the printer must configured
properly configured so that communication can be established.
(1) Connecting Printer
1) LAN
Connect the LAN cable to the printer
A direct cable or cross cable can be connected to the Hub or Host for use.
2) WLAN
Connect to the AP (Access Point) configured in Infrastructure mode in order to connect
to the LAN/wireless network.
In order to configure the network between wireless terminals, connect to the terminal in
Ad-hoc Mode.
Rev.1.02
A
Infrastructure Mode
Ad-hoc Mode
- 5 -
Network Interface