BIXOLON SRP-F310 User Manual page 20

WLAN Setting Values
Classification
Home
Printer Name
System
User Password
Confirm Password
WebServer SSL
Protocol
Network Mode
Adhoc Channel
Inactivity Time
Network IP Assignment
Subnet Mask
Authentication
Cryptograph
Authentication
Authentication ID
Authentication PW
Wizard
Rev.1.02
Item
WLAN setting status display
Printer Name
TCP Raw port that the printer
Printer Port
can use
ID to use for ftp, telnet, web-
User Name
server log-in
Password to use for ftp, telnet,
web-server log-in
Confirm Password
Set whether to use HTTPS
Http cannot be used when using
Https
TELNET Set whether to use Telnet
FTP Set whether to use FTP
SMTP Set whether to use SMTP
Wireless LAN operating mode
Channel when creating Adhoc
network
SSID ID of the AP to connect
TCP connection hold time
IP Assignment Method
Method
IP Address Printer IP
Subnet mask
Gateway Default Gateway
DNS Domain name server IP
Wireless LAN authentication
method
Wireless LAN encryption method
EAP Mode Authentication method
WEP Key Key for WEP encryption method
PSK Key Key for PSK encryption method
ID for EAP Authentication
Password for EAP Authentication 1~32 letters
Setting wizard for each step
Remarks
- 20 -
Network Interface
Input Range
0~32 letters
0~32767 integers
(except21,23,25,80,443,3318)
1~32 letters
1~32 letters
1~32 letters
Enable/Disable
Enable/Disable
Enable/Disable
Enable/Disable
Infrastructure/Adhoc
1~14
1~32 letters
0~3600 integer
DHCP/Manual
IP Address
IP Address
IP Address
IP Address
open, shared,
wpa1/2-psk, wpa1/2
none, WEP64/128,TKIP, AES
none, PEAP, TLS, LEAP, FAST
WEP64 (5 Ascii, 10 Hex)
WEP128 (13 Ascii, 26 Hex)
1~64 letters
1~32 letters