BIXOLON XT5-40 Series User Manual
  1. Manuals
  2. Brands
  3. BIXOLON Manuals
  4. Recording Equipment
  5. XT5-40 Series
  6. User manual

BIXOLON XT5-40 Series User Manual

Gpio interface
Hide thumbs Also See for XT5-40 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
GPIO Interface
XT5-40 Series
Ver. 1.01
http://www.bixolon.com

Advertisement

Table of Contents
loading

Related Manuals for BIXOLON XT5-40 Series

Summary of Contents for BIXOLON XT5-40 Series

  • Page 1 User’s Manual GPIO Interface XT5-40 Series Ver. 1.01 http://www.bixolon.com...

  • Page 2: Table Of Contents

    GPIO Interface Table of Contents Copyright ..........................3 Manual Introduction ......................4 Product Introduction ......................5 1. Content Confirmation ....................6 2. Installation & Usage ...................... 7 2-1 GPIO Interface Installation .................... 7 2-2 GPIO Interface Specifications ..................11 2-3 GPIO Interface Jumper Composition ................12 2-4 GPIO Interface Pin Composition .................

  • Page 3: Copyright

    It is strictly prohibited to copy, store, and transmit the whole or any part of the manual and any property of the product without the prior written approval of BIXOLON Co., Ltd. The information contained herein is designed only for use with this BIXOLON product.

  • Page 4: Manual Introduction

    GPIO Interface Manual Introduction This manual provides basic information about the GPIO interface and explains how to install, use, and check it. provide. Please read this manual thoroughly before using the product in order to protect the user's safety and prevent property damage. Symbol Introduction Precaution It describes death, physical injuries, serious financial losses,...

  • Page 5: Product Introduction

    GPIO Interface Product Introduction This user manual describes how to install the GPIO interface and use the product. The GPIO interface is connected to the external device PLC through a standard DB15 connector, and the input/output signal is connected to the external device PLC. Through this, you can check.

  • Page 6: Content Confirmation

    GPIO Interface 1. Content Confirmation The following items should all be contained in the GPIO Interface package. Contact the dealer from which the purchase was made if any item is damaged and/or missing. Product GPIO Interface Basic Components Screw 3ea User Manual Ver.

  • Page 7: Installation & Usage

    GPIO Interface 2. Installation & Usage 2-1 GPIO Interface Installation • Install GPIO Interface in the following ways: Power cord Power Switch 1) Turn off the printer power switch. 2) Unplug the power cord from the wall outlet. 3) Remove the power cord from the printer. - For the safety of people and equipment, please use the appropriate power cord for your country or region.
  • Page 8 GPIO Interface 4) Open the media cover. Remove 6 screws to remove the main cover. Media Cover Main Cover If there is a parallel (IEEE1284) interface, remove the FFC cable from the main board. FFC Cable Ver. 1.01 - 8 - KN04-00233E...
  • Page 9 GPIO Interface 5) Remove 3 screws to remove the parallel (IEEE1284) interface or parallel cover from the printer. Parallel (IEEE1284) Interface Parallel Cover 6) Insert the GPIO interface into the slot and tighten the 3 screws. GPIO Interface Ver. 1.01 - 9 - KN04-00233E...
  • Page 10 GPIO Interface 7) Securely insert the FFC cable under the guide interface and connect it into the main board connector. (Do not connecting the GPIO FFC cable at the connector of the Parallel (IEEE1284).) Connector Guide Interface FFC Cable (Blue) FFC Cable When connecting the FFC cable, make sure that the blue side faces the connector.

  • Page 11: Gpio Interface Specifications

    GPIO Interface 2-2 GPIO Interface Specifications GPIO Interface Specification in the following ways: • Parts Specifications Connector DB15 (female) 5V ± 10%, 1.0A 2, 7 pin (Not Isolated) 24V ± 10%, 0.4A 2, 7 pin Output Voltage (Not Isolated) GND / GND_ISO 1, 8 pin (Isolated Ground) Output (10K ±...

  • Page 12: Gpio Interface Jumper Composition

    GPIO Interface 2-3 GPIO Interface Jumper Composition Jumper settings and instructions for the GPIO Interface are as follows: • GROUND Description (GND Jumper) (Voltage Jumper) Connect Pins #1 and #2 with Jumper. Isolated Ground Connect Pins #2 and #3 with Jumper(default).

  • Page 13: Gpio Interface Pin Composition

    GPIO Interface 2-4 GPIO Interface Pin Composition Pin layout and settings of the GPIO Interface are as follows: • Signal Signal Description Name Type Use the CN4 jumper to set the ground. (Isolated GND or Not Isolated GND) Ground Refer to “2-3 GPIO Interface Jumper Settings" for details.
  • Page 14 GPIO Interface Can be used when the reprint function is active (Active Low/Active High) in the GPIO interface. * Disable: disable reprint function * Active Low: reprint when the signal changes from HIGH to LOW REPRINT Input * Active High: reprint when the signal changes from LOW to HIGH ※...

  • Page 15: Gpio Interface Signal

    GPIO Interface 2-5 GPIO Interface Signal The printer has the following signals according to the GPIO port mode settings: • 1) Printer Operation Signal (Port Mode1) 2) Printer Operation Signal (Port Mode2) Ver. 1.01 - 15 - KN04-00233E...
  • Page 16 GPIO Interface 3) Printer Operation Signal (Port Mode3) 4) Printer Operation Signal (Port Mode4) Ver. 1.01 - 16 - KN04-00233E...

  • Page 17: Gpio Setting

    GPIO Interface 3. GPIO Setting 3-1 GPIO Menu Composition Description Print Width Print Length Print Direction Print Speed Print Density Print Method Media Type Tear Off Setting Print Offset Left Position Print Mode Power Up Action Print Head Close GPIO Port Mode Start Print Mode GPIO Error on Pause...

  • Page 18: Gpio Menu Description

    GPIO Interface 3-2 GPIO Menu Description List Description Set the “END PRINT” signal for the GPIO port. Default Value Variable Value Off: GPIO disabled (printing without the start signal) 1: In general, the end print signal is HIGH and becomes LOW GPIO when printing/feeding.
  • Page 19 GPIO Interface Add Pause to the "ALERT" signal for the GPIO port. Default Value Enable Error on Pause Variable Value Enable, Disable Command Set the “REPRINT” signal type for the GPIO port. Default Value Disable Reprint Variable Value Disable, Active Low, Active High Command Check the ground status and output voltage.

  • Page 20: Gpio Control Commands

    GPIO Interface 4. GPIO Control Commands List of GPIO control commands 1) ^gt GPIO function setting or report setting data to host. 2) ^gv GPIO voltage setting or report setting data to host. *Restart the printer after setting the GPIO voltage. Ver.
  • Page 21 GPIO Interface 4-1 ^gt 1) Descriptions GPIO function setting or report setting data to host. 2) Syntax ^gtp1,p2,p3,p4 ,p5 3) Parameters s: Set Setting or Reporting g: Report to host 0: Off (print without the start signal) 1: Mode1 GPIO Port Mode 2: Mode2 3: Mode3 4: Mode4...
  • Page 22 GPIO Interface 4-2 ^gv 1) Description GPIO voltage setting or report setting data to host. *Restart the printer after setting the GPIO voltage. 2) Syntax ^gvp1,p2 3) Parameters s: Set Setting or Reporting g: Report to host 0: 0V GPIO voltage 5: 5V 24: 24V 4) Sample...

This manual is also suitable for:

Xt5-40nr

Table of Contents