Advertisement
TRCK02 Adaptor Frame Kit Assembly Instructions
STEP 1
Inverter support frame assembly
Use 8 off M6 x 25 screws
supplied to secure angle
runner supports
TR003 trolley
XTT 503 AC/
(not supplied
DC inverter (not
with this kit)
supplied with
Utilise existing trolley
fixings to secure front
& rear support frames
STEP 2
Inverter mounting
this kit)
Sheet 2 of 3
Affix water cooler
mounting brackets
using the existing
screws and lifting
eyes on the inverter
cover (note the
slots should be
biased towards the
back of the machine)
Lower inverter into
position so that the
front of the machine
sits flush with the
outside of the support
frame
Assembled inverter
support frame
Advertisement
