Parweld XTT-200 DC P Operator's Manual
  1. Manuals
  2. Brands
  3. Parweld Manuals
  4. Welding System
  5. XTT-200 DC P
  6. Operator's manual

Parweld XTT-200 DC P Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

XTT-200 DC P
OperatOr Manual
ISSue 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XTT-200 DC P and is the answer not in the manual?

Questions and answers

Related Manuals for Parweld XTT-200 DC P

Summary of Contents for Parweld XTT-200 DC P

  • Page 1 XTT-200 DC P OperatOr Manual ISSue 1...
  • Page 2 Thank you and congratulations on choosing Parweld. This Owner’s Manual is designed to help you get the most out of your Parweld products. Please take time to read the Safety precautions. They will help you protect yourself against potential hazards in the workplace. With proper maintenance this equipment should provide years of reliable service.

  • Page 3: Table Of Contents

    Contents Page 1.0 Safety precautions 2.0 product description 3.0 Technical Specifications 4.0 Description of controls 5.0 Installation 5.1 Unpacking the Machine 5.2 Location 5.3 Input and grounding connection 5.4 Output Polarity Connections 5.5 Torch Installation 5.6 Work return lead connection 6.0 Operation 6.1 MMA Welding guide 6.2 Basic TIG welding guide...

  • Page 4: Safety Precautions

    Insulate work clamp when not connected to work piece to prevent contact with any metal object. Protect yourself and others from flying sparks and hot metal. Be alert that welding sparks and hot materials from welding can easily go through small cracks and openings to adjacent areas. www.parweld.com...

  • Page 5: Product Description

    Turn face away from valve outlet when opening cylinder valve. Use the right equipment, correct procedures, and sufficient number of persons to lift and move cylinders. www.parweld.com...

  • Page 6: Description Of Controls

    5) MMA welding and will latch on the output when in this position Gas test this allow purging of the gas an testing of the gas flow. Ambient temperature between 0-40 In areas, free from oil, steam and corrosive gases. www.parweld.com...

  • Page 7: Input And Grounding Connection

    The most important factor is the high rate of heat conductivity of 6.0 Operation copper, making preheating of heavy sections necessary to give proper fusion of weld and base metal. WarnInG When using an open arc process, it is necessary to use correct eye, head, and body protection. www.parweld.com...

  • Page 8: Basic Tig Welding Guide

    At the end of the weld release the torch trigger and the power will slope down and switch off. (Note in 4T position you must press and release to start www.parweld.com...

  • Page 9: Fault Finding

    (c) Clean 5) Us the main control knob B (rotate and press) to select the joint before different welding parameters. As detailed below welding 3 4 5 6 7 8 9 10 11 www.parweld.com...
  • Page 10 Weld quality is dependent on the selection of the correct consumables, maintenance of equipment and proper welding technique. Description possible Cause Remedy Excessive bead Welding current is too Increase weld build up or poor current and/or faulty penetration or joint preparation poor fusion at edges of weld www.parweld.com...
  • Page 11 Refer to basic (d) Incorrect shielding TIG welding guide gas is being used. (d) Select the right (e) Poor work clamp shielding gas. Refer connection to work piece to basic TIG welding guide (e) Improve connection to work piece www.parweld.com...
  • Page 12 www.parweld.com...

  • Page 13: Accessories

    30PSI • Sensitive needle valve provides easy adjustment and the downward facing outlet connection eliminates hose kinking. Fittings • Fitted with standard 9 BSP inlet and outlet connections Stock Code Description 706100 Flow Meter Mixed Gas 15 lpm www.parweld.com...
  • Page 14 PRO26 and PRO26FX Air Cooled PRO-Grip MAX TIG Welding Torch www.parweld.com...
  • Page 15 Standard Ceramic Cup 5/89/16mm Bore Gas Lens Body Stock Code Description H 45V29 Gas Lens Body .0209/0.5mm Bore 45V24 Gas Lens Body .0409/1.0mm Bore 45V25 Gas Lens Body 1/169/1.6mm Bore 45V26 Gas Lens Body 3/329/2.4mm Bore 45V27 Gas Lens Body 1/89/3.2mm Bore www.parweld.com...

  • Page 16: Ec Declaration Of Conformity

    Directive 2011/65/EU of the European Parliament Restriction of use of certain hazardous substances in electrical and electronic equipment Type: XTT-200 DC P The above listed products are certified to be compliant with the rohs directive with all homogeneous component parts being controlled to ensure material contents as per the list below.

  • Page 17: Weee Statement

    WEE compliance outside the UK please contact your supplier/Importer Parweld is registered with a compliance scheme Official registration number is WEE/FD0255QV When your equipment reaches the end of its service life you should return it to Parweld where it will be reconditioned or processed for recycling.
  • Page 18 Parweld Limited Bewdley Business Park Long Bank Bewdley Worcestershire England DY12 2TZ tel. +44 1299 266800 fax. +44 1299 266900 www.parweld.com info@parweld.co.uk...

Table of Contents