The Printer Cannot Be Powered On - Canon iP7200 Series Manual

Home > Troubleshooting > Problems with the Printer > The Printer Cannot Be Powered On
U303

The Printer Cannot Be Powered On

Check 1: Press the ON button.
Check 2: Make sure that the power plug is securely plugged into the
power cord connector of the printer, then turn it back on.
Check 3: Unplug the printer from the power supply, then plug the
printer back in and turn the printer back on after leaving it for at least 2
minutes.
If the problem is not resolved, contact the service center.
Page top