Changing The Settings In The Wireless Lan Sheet - Canon iP7200 Series Manual

Home > Overview of the Printer
Settings > Changing the Settings in the Wireless LAN Sheet
N015

Changing the Settings in the Wireless LAN Sheet

To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the printer after modifying
the settings.
1.
Make sure that the Wi-Fi lamp is lit on the front side of the printer.
If the Wi-Fi lamp is off, Wireless LAN is inactive.
Follow the procedure below to activate Wireless LAN.
1. Press and hold the RESUME/CANCEL button until the POWER lamp flashes 10 times.
2. Release the RESUME/CANCEL button.
The Wi-Fi lamp is lit.
Note
To deactivate Wireless LAN, press and hold the RESUME/CANCEL button until the
POWER lamp flashes 12 times and release the button, then the Wi-Fi lamp goes off.
2.
Start up IJ Network Tool.
Starting up IJ Network Tool
3.
Select the printer in Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with
USB appearing in the Connected to column.
4.
Click the Configuration button.
5.
Click the Wireless LAN button.
6.
Change the settings or confirm.
Click OK after changing configuration. A screen is displayed asking you for confirmation before the
settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted
Settings screen is displayed.
> About Network Communication > Changing and Confirming Network