Canon iP7200 Series Manual page 247

If only one image is selected, only the preview appears and the Selected Images area does not
appear.
4.
Click Manual, then click Correct/Enhance.
5.
Click Face Brightener.
Note
The correction level can be changed by moving the slider displayed below Face Brightener.
When the cursor is moved over the image, the shape of the cursor changes to
6.
Drag to specify the area you want to correct, then click OK that appears over the
image.
The entire image is corrected so that the specified face area becomes brighter, and the
(Correction/Enhancement) mark appears on the upper left of the image.
Note
You can also drag to rotate the selected area.
Click (Display Comparison Screen) to display the images before and after the correction side
by side so that you can compare and check the result.
Click Undo to undo the last operation.
7.
Click Save Selected Image or Save All Corrected Images.
Corrected images are saved as new files.
(Cross).