Table of Contents
Advertisement
Quick Links
QUICK-START GUIDE
PRO-TILL 10/13
for
* Refer to operators manual for complete safety and operation info.
A
Connect tractor to 3-point hitch.
(NOTE: Adjust pin locations to coincide with CAT size of tractor's 3-point system.)
B
Connect Hydraulics
C
Lower Machine
D
Set Cutting Depth
IMPORTANT: Cycle oil in the Depth Control Cylinder
This is especially important after long periods of storage.
Start with 14 stops.
Test depth & adjust.
*
REMEMBER! You must complete Product
Registration to be eligible for Warranty.
DEPTH
1
1
1
before use.
WARRANTY
1
Depth Adjustment
1
(Depth Control on
Cylinder)
Typically
Set to 2"
142767 v1.0
Advertisement
Table of Contents
Related Manuals for Degelman PRO-TILL 10/13
Summary of Contents for Degelman PRO-TILL 10/13
- Page 1 QUICK-START GUIDE WARRANTY PRO-TILL 10/13 REMEMBER! You must complete Product * Refer to operators manual for complete safety and operation info. Registration to be eligible for Warranty. Connect tractor to 3-point hitch. (NOTE: Adjust pin locations to coincide with CAT size of tractor’s 3-point system.)
- Page 2 Pro-Till 13 157” (3.99m) • Check for missing, worn or (with 20” discs) MAX Depth damaged parts. Pro-Till 10 119” (3.02m) * Refer to operators manual for Pro-Till 13 159” (4.04m) complete safety and operation info. © 2022 Degelman Industries LP...
Need help?
Do you have a question about the PRO-TILL 10/13 and is the answer not in the manual?
Questions and answers