Page 4
Overview of Mounting Pro-Cast Applicator Hose Routing Bar Bracket Hose Routing Bar Bracket Flow Chart of Wing Hose Positions Center Frame Slider Bracket Center Frame Slider Bracket LH Wing LH Wing RH Wing RH Wing Slider Slider Slider Slider Bracket Bracket Bracket Bracket...
Page 5
Overview of Mounting Pro-Cast Applicator The distribution hoses have specific connection The hoses continue between the rear mounting legs positions on the distribution manifold. Each hose towards the tank mounted hose bracket (located on (1-18) has a specific attachment location. the RH side).
Page 6
Pro-Cast Leg Component & Mounting Location 290720 - Leg Assembly, Rear LH (1) Top Leg Mounting Hardware: 117599 - Lock Washer, 1/2 NL (16) 290715 - Leg 118267 - Bolt, 1/2 x 2 GR8 (16) Assembly, Rear RH (1) 290705 - Leg Rear Frame Assembly, Mounting Bolts:...
Page 7
Common Bracket Components Toolbox Kit and Bracket Components Tank Mounted Hose Routing Bracket 290330 - Toolbox 290775 - Tank Hose 290776 - Tank Hose Kit (1) Route Bracket (1) Route Support (1) 290332 - Rubber Strap (2) 117310 - Lock Mounting Hardware: Washer, 3/8 NL (2) 118129 - Bolt, 3/8...
Page 8
Pro-Till 30/Pro-Cast Location Overview (LH) Clamp Angle Clamp Angle A - Clamp Overview B - Clamp Overview LH Mount RH Mount 118279 - Bolt, 1/2 290853 - Angle, 290852 - Angle, x 1-1/2 GR8 (2) LH (1) RH (1) Front Left Front Left 290863 - Frame Clamp (1)
Page 9
Pro-Till 30/Pro-Cast Location Overview (RH) PT30 Front of Machine Approx. Hose Lengths Note: Suggested hose cut lengths 290138 - Distribution Head Assembly (1) per roll are listed below. You may Distribution Distribution wish to label hoses as they are Head - 18 Hose Head - 18 Hose cut.
Page 10
Pro-Till 36/Pro-Cast Location Overview (LH) Clamp Angle Clamp Angle A - Clamp Overview B - Clamp Overview LH Mount RH Mount 118279 - Bolt, 1/2 290853 - Angle, 290852 - Angle, x 1-1/2 GR8 (2) LH (1) RH (1) 290863 - Frame Clamp (1) 118587 - Flat Front Left...
Page 11
Pro-Till 36/Pro-Cast Location Overview (RH) PT36 Front of Machine Approx. Hose Lengths Note: Suggested hose cut lengths 290138 - Distribution Head Assembly (1) per roll are listed below. You may Distribution Distribution wish to label hoses as they are Head - 18 Hose Head - 18 Hose cut.
Need help?
Do you have a question about the PRO-CAST 80 and is the answer not in the manual?
Questions and answers