Powering On; Status Screen Menus; Battery Level; Radio Presets - visual engineering DropCam-SDR User Manual

DropCam-SDR

Powering On

A long press on the power button will start the boot up
procedure�
At start up the status screen will display DropCamSDR, as
shown�
The initiation of the start up procedure is further confirmed by
the unit producing a haptic vibration�

Status Screen Menus

The DropCam-SDR incorporates a simple to use status screen to monitor and configure user
settings� Use the '+' control button to scroll through the available options, select an option using
the power button�

Battery Level

The first status information screen displays the battery level,
giving both a percentage of charge remaining and a time in
minutes until empty�
Typically a full battery will power the DropCam-SDR for 3 hours
this is when the Mesh radio is transmitting full motion video�
This time can vary depending on the RF profile used.

Radio Presets

Following power on the Mesh radio will take a short time to
initialise and establish a connection�
The radio presets are configured as described in the
Maintainer Guide�
Use the '+' control button to scroll through the preset options,
select a preset using the power button�
visualengineering.co.uk
Sept 2022
Page 8