Tuono V4 1100 Factory
•
Cruise control / - (indicates the cruise control status)
•
Front brake qual. switch / - (front brake lever qualified switch)
•
Rear brake qual. switch / - (rear brake lever qualified switch)
•
Front brake "raw" switch / - (front brake lever "raw" switch)
•
Rear brake "raw" switch / - (rear brake lever "raw" switch)
•
Front brake lever switch / - (front brake lever switch)
•
Rear brake lever switch / - (rear brake lever switch)
•
ON-OFF cruise button/ - (indicates the status of the button concerning the cruise control on
the steering wheel)
•
Cruise control SET + / -
•
Cruise control SET - / -
•
Rear coil 1 / - (rear bank coil 1)
•
Front coil 2 / - (front bank coil 2)
•
Rear coil 3 / - (rear bank coil 3)
•
Front coil 4 / - (front bank coil)
•
Fuel pump / -
•
Tachometer / -
•
Rear lambda 1 heater / - (rear bank lambda 1 probe heater)
•
Rear cul. 1 low. inject. / - (rear bank cylinder 1 lower injector)
•
Front cul. 2 low. inject. / - (front bank cylinder 2 lower injector)
•
Rear cul. 3 low. inject. / - (rear bank cylinder 3 lower injector)
•
Front cul. 4 low. inject. / - (front bank cylinder 4 lower injector)
•
Rear cul. 1 upp. inject. / - (rear bank cylinder 1 upper injector)
•
Front cul. 2 upp. inject. / - (front bank cylinder 2 upper injector)
•
Rear cul. 3 upp. inject. / - (rear bank cylinder 3 upper injector)
•
Front cul. 4 upp. inject. / - (front bank cylinder 4 upper injector)
•
Fan
•
Front lambda 2 heater / - (front bank lambda 2 probe heater)
•
Secondary air valve / - (secondary air solenoid valve activation)
•
Stop light
DIAGNOSTIC TOOL: ELECTRICAL ERRORS
P0601 EEPROM error
Electrical diagnosis:
•
Circuit not functioning
Error cause:
•
Replace the injection control unit.
The instrument cluster indicates the presence of this error with the MI warning light on fixed.
Electrical system
ELE SYS - 91