Giant-Vac 2551E Operator's Manual

Tow-behind blower

Advertisement

Quick Links

TOW-BEHIND BLOWER
Congratulations!
You have just purchased one of the finest pieces of outdoor power equipment on the
market today. If properly cared for, your Giant-Vac Tow-Behind Blower will provide
years of dependable service. Please read and follow this instruction manual carefully in
order to get the most out of your new equipment.
As you unpack your unit, you will find the following parts:
1 – Power unit
1 – Draw bar
1 – Package of hardware
1 – Package containing operating manuals and warranty registration
Your Giant-Vac Tow-Behind Blower requires very little assembly. Simply follow the
instructions contained within this manual to begin enjoying the benefits of your new unit.
Each Giant-Vac product leaves our factory in excellent condition; occasionally, however,
some damage may occur during shipment. If any such damage is found upon initial
inspection, immediately notify the transport carrier who delivered your machine, as they
are solely responsible for such damage, as well as any subsequent adjustments
necessary.
Gasoline and Diesel engine exhaust and some of its constituents are
known to the State of California to cause cancer, birth defects and other
reproductive harm.
As an owner of off-road gasoline or diesel engine equipment and/or as an
employer, you also may have an obligation under the California
Occupational Safety and Health Act or under Proposition 65 to warn
persons exposed to gas and diesel engine exhaust and/or other
Proposition 65 chemicals in and around your workplace. See California
Health and Safety Code section 25249.5, Title 22 of the California Code of
Regulations at Section 1200 er seq., and Title 8 of the California Code of
Regulations Section 5194.
THE GIANT-VAC
MODEL 2551E
OPERATOR'S MANUAL
CALIFORNIA PROPOSITION 65 WARNING
9/01 Revision
Manual No. 2551 (9/2001)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2551E and is the answer not in the manual?

Questions and answers

Summary of Contents for Giant-Vac 2551E

  • Page 1 You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared for, your Giant-Vac Tow-Behind Blower will provide years of dependable service. Please read and follow this instruction manual carefully in order to get the most out of your new equipment.
  • Page 2 READ THE FOLLOWING SAFETY RULES CAREFULLY BEFORE ASSEMBLING OR OPERATING UNIT: • Regard your Giant-Vac as a piece of power equipment and teach this regard to all who will operate this unit. Never allow children or young teenagers to operate the unit.
  • Page 3: Draw Bar Assembly

    • Connect battery cables from unit to corresponding terminals on battery. Assembly of your Giant-Vac Tow-Behind Blower is complete. You are now ready to mount your unit onto the rear of your towing vehicle. Refer to the vehicle manufacturer’s instructions...
  • Page 4: Unit Operation

    All engine service, warranty or otherwise, is required to be performed by a manufacturer- authorized service center. Giant-Vac, Inc. is neither authorized nor responsible for any type of warranty engine service, nor is it equipped to perform any such service.
  • Page 5: Operating The Blower

    • Each discharge opening has an adjustable deflector to assist in directing the ground air flow for varying conditions. *Please note that the Giant-Vac Tow-Behind Blower is designed to be equally efficient in either left or right hand discharge mode.
  • Page 6: Maintenance And Storage

    MAINTENANCE AND STORAGE • Follow implicitly the engine manufacturer’s recommendations for maintenance. • Never make any adjustments to the unit until the engine is off and the spark plug wire is disconnected. • If carburetor adjustment is necessary, stand to one side and keep feet and hands in the clear while making adjustments.
  • Page 7 Any obligation under this warranty is expressly limited to the replacement or repair, at an authorized servicing Giant-Vac dealer, or at a point designated by us, of such parts as appear to us to have been defective. All defective parts have to be returned freight prepaid before credit will be issued.
  • Page 9 PARTS LIST NO. 5746 REF. PART DESCRIPTION 2551E 10224 Housing & base assy 38041 Draw bar 31033 3/8-16 x 1 hex bolt (draw bar to housing assy) 31034 3/8” flat washer 31008 3/8” lock washer 31009 3/8-16 hex nut 24630...
  • Page 10 PARTS LIST NO. 5746 REF. PART DESCRIPTION 2551E 31008 3/8” lock washer 31837 Battery terminal cover - black 31836 Battery terminal cover - red 31830 Fuel drain plug – 3/8”IPT 39070 Engine – 25hp Kohler Command 31112 3/8-16 x 1-1/2” hex bolt (engine to housing & base assy) 31008 3/8”...

Table of Contents