Configuring Hpt401Bt - Javad HPT401BT User Manual

Configuration

Configuring HPT401BT

HPT401BT and external device connection procedure varies slightly depending on the type of external
device used. In general, the connection procedure is as follows:
Note:
Refer to your Bluetooth
information.
1. Turn on a Bluetooth
mode is Master; the modem's Bluetooth
2. Instruct the external device (Master) to search for the modem (Slave).
3. Once the Master device detects the modem, use the procedure described in the external device's
documentation to connect it with the modem.
4. Configuring HPT401BT
1. Connect the computer and HPT401BT, as described in"Connecting HPT401BT and Computer" on
page 14.
2. Turn on the HPT401BT.
3. Start ModemVU. Main window appears (Figure 4). Choose HPT401BT modem and click OK.
T h e n s e l e c t t h e C O M p o r t t h e m o d e m i s c o n n e c t e d t o , a n d c l i c k C o n -
nect:
16
®
-enabled external device documentation for more detailed connection
®
-enabled external device and your receiver. The default external device
®
module mode is Slave.
Figure 4. Main window
www.javad.com