Page 3
The following drawing shows the connectors of the devices. if it flashes slowly, the application software will c-pro 3 NODE kilo is a range of programmable controllers for applications in refrigeration and air conditioning sectors. be compiled and running in debug modality The controllers have a considerable number of inputs and outputs;...
Page 4
This document is exclusive property of EVCO; reproduction and disclosure are prohibited without express authorisation from EVCO. Via Feltre 81, 32036 Sedico (BL) ITALY EVCO is not liable for any features, technical data and possible errors stated in this document or deriving from use of the same. phone +39 0437 8422 | fax +39 0437 83648 EVCO cannot be considered liable for damages caused by failure to comply with warnings given in this document.
Need help?
Do you have a question about the c-pro 3 NODE kilo and is the answer not in the manual?
Questions and answers