Table of Contents
Advertisement
Quick Links
PRODUCT NAME: Banyan Bone Inlay Headboard
ITEM NUMBER: MB489
ASSEMBLED DIMENSIONS: 68"H x 65.6"W x 3.8"D
RECOMMENDED BED FRAME: LEGGETT AND PLATT FRAMES:
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1/30/2019
K45G / K45R - Queen / King / California King
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA
Page 1 of 3
Advertisement
Table of Contents
Related Manuals for Ballard Designs MB489
Summary of Contents for Ballard Designs MB489
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Banyan Bone Inlay Headboard ITEM NUMBER: MB489 ASSEMBLED DIMENSIONS: 68”H x 65.6”W x 3.8”D RECOMMENDED BED FRAME: LEGGETT AND PLATT FRAMES: K45G / K45R - Queen / King / California King PRODUCTS ARE NOT INTENDED MADE IN INDIA FOR COMMERCIAL USE.
- Page 2 Ltr. Qty. Hardware Included Two person assembly Bolts suggested. M8 x 85mm NOTE: To avoid accidentally discarding small parts or Nuts hardware, retain all carton contents until assembly is complete. Wrench Ltr. Qty. Components Headboard (D) Customer Service: 800-367-2810 Page 2 of 3 Online: www.ballarddesigns.com...
- Page 3 STEP 1: Align holes on Metal Bed Frame with corresponding holes on front of Headboard Legs (D). Attach Metal Bed Frame using 2 Bolts (A) and 2 Nuts (B) on each leg of Headboard. Secure Nuts with Wrench (C). Cleaning & Care: DO NOT use alcohol based products or spray polisher as they can damage the finish.
- Page 4 ANTI-TIP INSTALLATION Ltr. Qty. Hardware Included Small Screws Large Screws Brackets Retention Belts Attach 2 Brackets (G) horizontally to the top back corners of the headboard using the Small Screws (E). Screw the remaining Brackets (G) into the wall vertically 1 inch below the previously installed Brackets using the Large Screws (F).
Need help?
Do you have a question about the MB489 and is the answer not in the manual?
Questions and answers