Table of Contents
Advertisement
IX. DEALER SERVICE AND ADJUSTMENT
J. SWING-AWAY FOOTPLATE HEIGHT ADJUSTMENT
Height Adjustment
NOTE – It is recommended that you maintain a minimum of 2.0 inches between the lowest point on the
footrest and the fl oor.
1.
Loosen set screw (A) using a 3/16 inch hex key.
2.
Slide footrest extension (B) up or down inside frame tube to desired height.
3.
Tighten set screw (A). Use a torque setting of 16.3 Nm [144 in-lbs].
K. ANGLE ADJUSTABLE FOOTPLATE
1.
Angle Adjustment of Composite Angle Adjustable Footplates
a.
Remove bolt (C)
b.
Pull footplate section (D) away from extension.
c.
Reposition footplate back onto extension in new angular position. Use premarked extension
coupling (E) as guide.
d.
Insert again bolt (C) and tighten securely.
L. ARTICULATING LEGREST
1.
Height Adjustment of the Calf Pad
a.
Loosen the retaining nut (F) located at the back of the calf pad bracket assembly.
b.
Slide the calf pad bracket assembly up or down.
c.
Tighten the retaining nut (F) once the pad is in the desired position.
2.
Height Adjustment with Extension Tube
a.
(See "Swing-away Height Adjustment" Section IX-J)
M. ELEVATING LEGREST
1.
Height Adjustment of the Calf Pad
a.
Loosen the retaining nut (G) located at the back of the calf pad bracket assembly.
b.
Slide the calf pad bracket assembly up or down.
c.
Tighten the retaining nut (G) once the pad is in the desired position.
2.
Height Adjustment with Extension Tube
a.
(See "Swing-away Height Adjustment" Section IX-J).
38
39
40
37
TORQUE !
0
23
®
™
Quickie
ACCESS
A
D
E
C
F
Articulating
legrest
G
Elevating
legrest
252849 Rev. B
37
B
38
39
40
Advertisement
Table of Contents
