golmar ART 4 LITE/G2+ User Manual page 17

ART 4 LITE /G2+
Continued from previous page.
PERIOD OF TIME FOR 'DO NOT DISTURB' MODE MENÚ
"Automatic door openning": This selection is visible in the "Do Not Disturb" settings menu, with the special
code '0441' (Doctor mode) already entered in the monitor
codes pp. 23 to 26).
button....... (blinking in white color) on the monitor.
To set a period of time for automatic door openning
door panel), go to the option with icon
by pressing the button below icon
59 minutes)
validate the changes made by pressing the button below icon
MONITOR
Note:
In standby monitor, you can also access the menu by pressing the push
for 'Automatic door openning' mode
Option selection screen
07 00
07 00
Option selection screen
07 00
07 00
mode (after 3 seconds of receiving a call from the
1
pressing the button below icon
. Then you can set a period of time
, by pressing corresponding buttons
for automatic door opening
or and select the option
(from 00h & 01 minute to 23h &
.
Time period setting screen
07 00
08 30
Continued overleaf
17
(see special
1
/ and / ,
# #
# #