Advertisement
(1)
EK - SLIDE RAIL 8' GREEN RIGHT - A100054
SLIDE ASSEMBLY
STEP 2
USING A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD
BE 12 INDENTIONS ON EACH RAIL.
PLACE ONE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE CHANNEL
ON THE INSIDE OF THE RAIL. HOLD THE SLIDE BED IN PLACE WHILE A HELPER BENDS THE SLIDE BED INO THE
CHANNEL. MAKE SURE THE SLIDE BED IS COMPLETELY INSERTED INTO THE CHANNEL.
INSERT THE TWO CENTER SLIDE BRACES INTO THEIR RESPECTIVE LOCATIONS. SECURE THE SLIDE BED AND
CENTER USING THE PROVIDED HARDWARE.
REPEAT THIS PROCESS FOR THE OPPOSITE SLIDE RAIL.
TIP: A HELPER IS REQUIRED FOR THIS STEP.
M78 - CENTER SLIDE BRACE - W4L13408
(2)
5/8"x3 3/8"x14 1/4" (16x86x362)
M78
SLIDE RAIL 8' GREEN LEFT
USE A RUBBER MALLET TO TAP THE SLIDE BED INTO PLACE IF NEEDED.
(1)
EL - SLIDE RAIL 8' GREEN LEFT - A100055
SLIDE RAIL 8' GREEN RIGHT
(1 PLC)
(1 PLC)
28
SCREW PFH
(24)
SCREW PFH 8x2 1/2
(24 PLCS)
8x2 1/2
Advertisement
