I
NSTALLATION AND SETUP
CONTENTS
Setting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Connecting User Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
SETTING UP
Unpacking
Unpack and inspect your generator carefully. Check for obvious physical damage. If no
damage is apparent, proceed with the unit connections. If you do see signs of shipping
damage, contact Advanced Energy Industries, Inc., and the carrier immediately. Save the
shipping container for submitting necessary claims to the carrier.
Grounding
The RFG 5500 provides an RF (EMI) ground stud. It is recommended that a suitable ground
connection be made to this stud to prevent or minimize radio frequency interference.
NOTE:
We recommend copper strap material 0.5" or wider.
For more information about grounding, refer to AE Application Notes titled Grounding p/n
5600031A.
Mounting
Figure 3-1 provides the mounting hole dimensions as well as dimensions of the unit to aid in
installation.
P/N 5706045C
RFG 5500 GENERATOR WITH DISPLAY
December 2000
3-1