Stryker Gynnie OB-GYN 1061 Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. Gynnie OB-GYN 1061
  6. Maintenance manual
Stryker Gynnie OB-GYN 1061 Maintenance Manual

Stryker Gynnie OB-GYN 1061 Maintenance Manual

Stretcher
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Ma i n t e n a n c e
I mp o r t a n t
I n f o r ma t i o n
F i l e i n y o u r
m a i n t e n a n c e
r e c o r d s
Ma n u a l
Me d i c a l
®
G y n n i e O B - G Y NS t r e t c h e r
Mo d e l 1 0 6 1
F o r p a r t so r t e c h n i c a l
a s s i s t a n c ec a l l
8 0 03 2 70 7 7 0( o p t i o n2 )

Advertisement

Table of Contents
loading

Related Manuals for Stryker Gynnie OB-GYN 1061

Summary of Contents for Stryker Gynnie OB-GYN 1061

  • Page 1 Ma i n t e n a n c e Me d i c a l Ma n u a l ® G y n n i e O B - G Y NS t r e t c h e r Mo d e l 1 0 6 1 I mp o r t a n t I n f o r ma t i o n...

  • Page 2: Table Of Contents

    Table of Contents Introduction Specifications ................Warning / Caution / Note Definition .
  • Page 3 Table of Contents Assembly Drawings And Parts Lists (Continued) Jack Assembly ............... 30−32 Base Assembly with Steerlock Caster Option .

  • Page 4: Introduction

    +18 to −18 ° Trendelenburg \ Reverse Trendelenburg Break−Away Point from Wall 64” Stryker reserves the right to change specifications without notice. WARNING / CAUTION / NOTE DEFINITION The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed. WARNING Alerts the reader about a situation, which if not avoided, could result in death or serious injury.

  • Page 5: Preventative Maintenance

    Preventative maintenance should be performed at a minimum of annually. A preventative maintenance pro- gram should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.

  • Page 6: Cleaning

    If these types of products are used to clean Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretchers will leave a cor- rosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.

  • Page 7: Service Information

    Service Information CASTER ASSEMBLY REPLACEMENT 1. Remove the old caster assembly. 2. Install the replacement caster and caster nut. Tighten the caster nut to 90−105 ft.−lb. with a torque wrench. NOTE A new caster assembly with a 3M patch does not require the application of Loctite at assembly. However, the patch is appropriate for only one installation.

  • Page 8: Caster Cover Installation And Removal

    Service Information CASTER COVER REMOVAL AND REPLACEMENT Looking through the larger of the two side cut−outs, align cover with axle nut or bolt head, as shown. Double Prongs Push down on the opposite side of the cover until single prong engages with caster horn. Single Prong Top View (Cut−Away) Properly Attached...

  • Page 9: Brake Cam Replacement

    Service Information BRAKE CAM REPLACEMENT Brake Cam Part Number 715−201−213 Required Tools: Phillips Screwdriver String or Bungee Cord 3/32” Allen Wrench 1/8” Allen Wrench Procedure: 1. Remove the four Phillips screws holding the base hood to the frame. Lift and support the base hood using string or bungee cord.

  • Page 10: Brake Adjustment

    Service Information BRAKE ADJUSTMENT Required Tools: 3/32” Hex Allen Wrench Pry Bar Thread ”Locktite” Flat on thread of stud must always be aligned with the set screw. Turn must always be full circle only. BASE SIDE CONTROL PEDAL LINKAGE ADJUSTMENT Required Tools: 3/8”...

  • Page 11: Base Side Control Brake/Steer Gear Replacement

    Service Information BASE SIDE CONTROL BRAKE/STEER GEAR REPLACEMENT Required Tools: Pliers String or Bungee Cord Floor Jack or Equivalent 1/8” Allen Wrench 5/32” Allen Wrench 3/8” Box End Wrench (2) 9/16” Box End Wrenches 3/16” Punch 1/4” Punch Hammer Procedure: 1.

  • Page 12: Jack Replacement

    Service Information JACK REPLACEMENT (WITHOUT COMPRESSION SPRING) Required Tools: 3/8” Wrench 1/2” Socket 1/2” Wrench Needle−Nose Pliers Replacement Procedure: 1. Apply stretcher brakes. Raise litter to full up. Raise Fowler to full up and raise siderails. 2. Use a 3/8” wrench to remove the bolt in the litter support tube above black bellows on both ends. 3.

  • Page 13: Jack Assembly Torque Specification

    Service Information JACK ASSEMBLY TORQUE SPECIFICATION Jack Assembly with Threads Oiled 1. Jack Cap Assembly to Jack Actuator Cylinder 75 to 85 Foot Pounds 2. Jack Actuator Cylinder to Jack Base Assembly 55 to 65 Foot Pounds Jack Base Assembly with Threads Oiled 1.

  • Page 14: Checking Hydraulic Fluid Level

    6. The hydraulic fluid should be visible at the bottom of the fill hole. If it is not, add Mobil Aero HFA hydraulic fluid (Stryker part number 2020−70−475) until the fluid is visible at the bottom of the fill hole. Replace the fill plug.

  • Page 15: Hydraulic Valve Replacement

    Service Information HYDRAULIC VALVE REPLACEMENT Required Tools: 3/8” Open End Wrench Stiff Wire (with bent, pointed end) Small Needle Nose Pliers 1/2” Diameter Rod Torque Wrench (with Ft. Lbs. adjust.) Replacement of the Poppet Valve: WARNING To avoid personal injury or damage to the stretcher, remove the litter and the base hood with the assistance of another person before beginning service on the jacks.
  • Page 16 Service Information HYDRAULIC VALVE REPLACEMENT (CONTINUED) Replacement of the Check Valve: NOTE It requires two people to safely perform this procedure. WARNING To avoid personal injury or damage to the stretcher, always remove the litter and the base hood before begin- ning service on the jacks.

  • Page 17: Adjustable Pressure Compensated (P.c.) Valve Replacement

    Service Information ADJUSTABLE PRESSURE COMPENSATED (P.C.) VALVE REPLACEMENT P.C. Valve Part Number 5050−70−50 WARNING To avoid personal injury or damage to the stretcher, always remove the litter and the base hood before begin- ning service on the jacks. Lower the jack rod completely to relieve the pressure on the pump piston side of the jack.

  • Page 18: Base Lubrication

    Service Information BASE LUBRICATION Back to Table of Contents...

  • Page 19: Pneumatic Fowler Adjustment

    Service Information PNEUMATIC FOWLER ADJUSTMENT Required Tools: 5/32” Hex Allen Wrench 1/2” Open End Wrench Adjustment Procedure: 1. For easier access, move Fowler to 75_ or higher. 2. Using a 1/2” open end wrench, loosen the nuts in the actuator arms on the end of the trip bar. 3.

  • Page 20: Pivot Teeth And Mount Teeth Replacement

    Service Information PIVOT TEETH AND MOUNT TEETH REPLACEMENT Required Tools: Phillips Screwdriver Procedure: 1. Remove the foot support (see page 18). 2. Remove the foot support pivot assembly (see page 18). 3. Remove the pivot mount to gain access to the two pop rivets holding the pivot teeth plate. 4.

  • Page 21: Quick Reference Replacement Parts List

    Quick Reference Replacement Parts List PART NAME PART NUMBER Brake Adjuster Service Tool ..........715−700−150 Caster Replacement Kit .

  • Page 22: Stretcher Assembly

    Stretcher Assembly Back to Table of Contents...
  • Page 23 Stretcher Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 716−1−286 Spacer 25−132 Flange Rivet (page Base Assembly 7900−1−102 Velcro (12”) (page Litter Assembly 1210−800−8 Patent Label 1061−31−10 Weight Tray 1061−50−162 Foot Support Ramp 1061−31−14 Tray 25−40 Rivet (page...

  • Page 24: Base Assembly

    Base Assembly Assembly part number 1061−1−10 (reference only) Return to Table of Contents...
  • Page 25 Base Assembly HEAD END Return to Table of Contents...
  • Page 26 Base Assembly HEAD END Return to Table of Contents...
  • Page 27 Base Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 42− l l o −301−403 Miter Gear 715−1−11 Brake Cushion 1210−301−404 Spur Gear 715−1−61 Brake Ring 1210−301−405 Combination Gear 715−1−92 Pump Pedal Shaft 11−3 Washer 715−1− l l o −4 Washer...

  • Page 28: Brake Adjuster Assembly

    715−201−150 Brake Adjuster Assembly Item Part No. Part Name Qty. 715−1−180 Cam Bearing 715−201−62 Threaded Stud Assembly 14−4 Nylon Washer 28−8 External Retaining Ring Back to Table of Contents...

  • Page 29: Brake Cam Assembly

    715−201−213 Brake Cam Assembly Item Part No. Part Name Qty. 8−21 Hex Nut 16−59 Soc. Hd. Shoulder Screw 715−201−173 Brake Connecting Link 715−301−221 Brake Cam Back to Table of Contents...

  • Page 30: Uni−Lowering Pedal Assembly

    Uni−Lowering Pedal Assembly Assembly part number 1061−500 (reference only) Item Part No. Part Name Qty. 1210−201−152 Side Release Pedal Weldment 1061−201−127 Uni−Lowering Pedal 715−1−333 Release Rod Stop Sleeve 25−50 Blind Rivet Back to Table of Contents...

  • Page 31: Jack Assembly

    1231−70−210 Constant Flow Jack Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 388−100−38 Plug 926−20−161 Parker Packing 390−1−238 Actuator Gasket 926−20−162 Wear Ring 390−1−243 Gasket (page Jack Base Ass’y 390−1−244 Base Gasket 4−14 Soc. Hd. Cap Screw 390−2−139 Retaining Ring 45−14...
  • Page 32 Constant Flow Jack Base Assembly Assembly part number 5050−370−100 (reference only) Item Part No. Part Name Qty. Item Part No, Part Name Qty. 48−147 Base Plug 2025−75−87 Pin Housing 390−2−134 Conical Comp. Spring 5050−170−50 Adj. P.C. Valve Cartridge 1 715−1−309 Valve Plug 5050−370−110 Jack Base...
  • Page 33 715−100−325 Jack Pump Piston Assembly Assembly part number 715−200−325 (reference only) Item Part No. Part Name Qty. 715−201−318 Pump Piston 45−110 O−Ring 715−1−328 Piston Wear Ring 14−50 Bearing Retainer 715−201−327 Cylinder Wear Ring 715−1−316 Pump Cylinder 715−1−400 O−Ring Back Up 715−1−329 Pump Seal (not shown) Back to Table of Contents...

  • Page 34: Base Assembly With Steerlock Caster Option

    Base Assembly with Steerlock Caster Option Assembly part number 1000−159 (reference only) Item Part No. Part Name Qty. (page Steer Caster Assembly (page Caster Assembly 1000−210−62 Steer Lock Linkage Bar 8−21 Shoulder Bolt 14−2 Washer 38−211 Spring Back to Table of Contents...
  • Page 35 715−269−100 Caster Assembly with Steerlock Assembly part number 715−2−21 (reference only) Item Part No. Part Name Qty. 700−10−50 Steer Lock Caster Weldment 715−2−25 Caster Wheel 16−60 Hex Nut 3−99 Hex Bolt 715−3−96 Hex Bolt 1000−59−10 Latch Assembly 11−310 Flat Washer Back to Table of Contents...
  • Page 36 Standard Caster Assembly Item Part No. Part Name Qty. 3−99 Hex Hd. Cap Screw 11−310 Washer 16−60 Hex Nut 715−2−16 Horn Assembly 715−3−96 Hex Hd. Cap Screw 715−1−265 Wheel Cover, Right 715−1−266 Wheel Cover, Left 715−2−25 Wheel 715−1−158 Caster Nut (not shown) p/n 715−259−400 −...

  • Page 37: Base Assembly With Fifth Wheel Option

    Base Assembly with Fifth Wheel Option Assembly part number 1010−260 (reference only) Item Part No. Part Name Qty. 14−79 Nylon Washer 11−13 Washer 27−16 Cotter Pin (page Pivot Rod Assembly 1210−1−145 1210−1−148 Torsion Spring 1210−201−149 Spring Spacer 4−10 Bolt (page Wheel Arm Assembly 1210−1−146 Torsion Spring...

  • Page 38: Fifth Wheel Pivot Rod Assembly

    Fifth Wheel Pivot Rod Assembly Assembly part number 1210−201−2 (reference only) Item Part No. Part Name Qty. 1210−1−143 Pivot Rod 14−79 Nylon Washer 1210−1−144 Roller 28−131 Snap Ring 27−16 Cotter Pin Back to Table of Contents...

  • Page 39: Fifth Wheel Arm Assembly

    715−201−125 Fifth Wheel Arm Assembly Item Part No. Part Name Qty. 1210−201−553 Wheel Arm 1210−1−147 Fifth Wheel 3−31 Hex Hd. Cap Screw 16−35 Nylock Nut Back to Table of Contents...

  • Page 40: Base Labeling Assembly

    715−1−134 Head End Bellows 1210−201−335 Red Brake Label 1210−201−336 Green Steer Label 946−201−60 Stryker Logo Label 1061−201−60 Large Stryker Logo Label 1061−700−123 Head End Brake/Steer Label 1061−200−2 GYN Logo Label 1061−700−221 Side Control Label, Right 1061−700−222 Side Control Label, Left 1010−900−115...

  • Page 41: Litter Assembly

    Litter Assembly Assembly part number 1061−30−10 (reference only) Back to Table of Contents...
  • Page 42 Litter Assembly Back to Table of Contents...
  • Page 43 Litter Assembly Back to Table of Contents...
  • Page 44 Litter Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 37−10 Hole Plug 4−330 Soc. Hd. Cap Screw 926−400−142 Bumper 5−32 Carriage Bolt 1001−30−29 End Plug 5−33 Carriage Bolt 1061−1−121 Jack Support Weldment 5−24 Carriage Bolt 1061−30−36 Ft.

  • Page 45: Foot Section Assembly

    Foot Section Assembly Assembly part number 1061−40−10 (reference only) DETAIL A DETAIL B Back to Table of Contents...
  • Page 46 Foot Section Assembly Item Part No. Part Name Qty. 721−40−26 Foot Board Receptacle 946−1−155 Bumper 1061−40−18 Foot Section Bumper 1061−40−19 Foot Section Pivot Cap 1061−40−20 Foot Section Weldment 1061−40−30 Ft. Section Release Bar Wldmt. 1210−201−550 Skid 1210−201−671 Dampener 3000−300−99 Modified Bushing 14−3 Washer 16−3...

  • Page 47: Foot Support Pivot Assembly

    1061−50−30 Foot Support Pivot Assembly Back to Table of Contents...
  • Page 48 1061−50−30 Foot Support Pivot Assembly Item Part No. Part Name Qty. 1061−50−45 Machined Pivot 1061−50−150 Pivot Mount 1061−50−160 Pivot Teeth 1061−50−161 Mount Teeth 1061−50−31 Slide Stop 1061−50−51 Pivot Bushing 1061−50−52 Rubber Bushing 1061−50−56 Slide 1061−50−57 Slide Plate 4−102 Soc. Hd. Cap Screw 16−118 Cone Lock Nut 25−122...

  • Page 49: Foot Support Assembly

    1061−50−10 Foot Support Assembly, Right 1061−50−11 Foot Support Assembly, Left Back to Table of Contents...
  • Page 50 Foot Support Assembly, Right & Left Item Part No. Part Name Qty. 1061−50−42 Foot Cup Assembly 1061−50−12 Handle Weldment 4−442 Button Head Torx 1061−50−35 Release Handle 1061−50−54 Release Handle Pivot 4−443 Button Head Torx 1061−50−44 Threaded Cable Insert Back to Table of Contents...

  • Page 51: Siderail To Litter Assembly

    Siderail to Litter Assembly Assembly part number 1061−120−10 (reference only) FOOT END FOOT END Back to Table of Contents...
  • Page 52 Siderail to Litter Assembly Item Part No. Part Name Qty. 37−215 Dome Plug 1001−226−100 End Cap Assembly 1001−226−15 Pivot Sleeve 1001−226−16 Pivot Bearing 1001−226−17 Siderail Spring 1001−226−101 Top Plug Assembly 1001−226−20 Spring Spacer 1001−226−102 Top Plug Assembly 1001−226−45 Latch Spacer 1001−226−46 Latch Pivot, Right 1001−226−47...

  • Page 53: Seat/Fowler Assembly

    Seat/Fowler Assembly Assembly part number 1061−131−100 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1061−230−120 Midsection Skin 14−21 Washer (page Fowler Assembly 16−36 Stover Lock Nut 25−172 Rivet 16−35 Stover Lock Nut 16−28 Stover Lock Nut 23−256 Pan Hd.

  • Page 54: Pneumatic Fowler To Assembly

    Pneumatic Fowler Assembly Assembly part number 1210−31−120 (reference only) Item Part No. Part Name Qty. 4−161 Hex Soc. But. Hd. Cap Screw 7−71 Truss Hd. Mach. Screw 25−120 Pop Rivet 15−37 Jam Nut 15−50 Hex Nut 16−28 Nylock Nut 21−125 Set Screw 21−126 Set Screw...
  • Page 55 Fowler Outer Housing Assembly, Right & Left Assembly part number 1210−31−106 (Right) Item Part No. Part Name Qty. 25−174 Semi−Tubular Rivet 1210−31−103 Pivot Tab 1210−31−104 Outer Housing, Right Assembly part number 1210−31−107 (Left) Item Part No. Part Name Qty. 25−174 Semi−Tubular Rivet 1210−31−103 Pivot Tab...

  • Page 56: Steering Handles Assembly

    1711−151 Head End Steering Handles Assembly Item Part No. Part Name Qty. 26−114 Roll Pin (page Push Handle Assembly Back to Table of Contents...
  • Page 57 1211−351−10 Push Handle Assembly Item Part No. Part Name Qty. 1010−354−24 Stop Link 1211−151−18 Sleeve Assembly 26−118 Roll Pin Back to Table of Contents...
  • Page 58 390−25 Standard, Removable I.V. Pole Assembly Item Part No. Part Name Qty. 0024−023−000 Plastic Knob 0390−003−053 Double I.V. Ass’y 0393−003−043 Tube Assembly 0004−496−000 Soc. Hd. Cap Screw Back to Table of Contents...
  • Page 59 1061−117 Optional Tethered IV Pole Item Part No. Part Name Qty. 4−107 Soc. Hd. Cap Screw 11−62 Washer 16−3 Fiberlock Nut 25−172 Rivet 34−22 Cord Clamp (page Tethered IV Pole Assembly 1211−117−21 Backing Plate 1211−117−22 IV Clip Back to Table of Contents...
  • Page 60 1211−117−10 Tethered IV Pole Assembly Item Part No. Part Name Qty. 52−17 Spacer 1211−117−20 Cable Assembly 926−400−062 Stop Sleeve 1010−59−16 IV Hook 1211−117−11 Extension Rod 1211−117−12 Base Tube Weldment 4−495 Low Hd. Soc. Hd. Cap Screw 1211−117−16 Knob 14−20 Nylon Washer 4−232 Button Hd.
  • Page 61 1061−110 Optional 2−Stage IV Assembly Item Part No. Part Name Qty. 3−50 Hex Hd. Cap Screw 4−199 But. Hd. Cap Screw 16−28 Hex Nut 16−36 Nylock Hex Nut (page IV Pole Assembly 1211−310−112 Pivot Weldment Back to Table of Contents...
  • Page 62 1211−210−10 Optional 2−Stage IV Pole Assembly Item Part No. Part Name Qty. 8−31 Soc. Hd. Cap Screw 52−17 Washer 926−400−162 Spacer 1211−210−29 2nd Stage Assembly 1001−359−13 Dampener 1001−159−28 Base Tube 1010−59−16 IV Hook (page IV Pole Latch 1001−359−112 Pivot Back to Table of Contents...
  • Page 63 1211−210−26 IV Pole Latch Assembly Item Part No. Part Name Qty. 28−167 Retaining Ring 31−4 Steel Ball 38−392 Crest−to−Crest Spring 1211−91−34 Release Label 1211−110−18 IV Latch Seal 1211−110−20 Washer 1211−110−21 IV Latch Locking Pin 1211−110−22 IV Latch Guide 1211−110−24 IV Latch O.D. Housing 1211−110−35 Washer 1211−110−36...
  • Page 64 1061−110−001 Optional 3−Stage IV Assembly Item Part No. Part Name Qty. 3−50 Hex Hd. Cap Screw 4−199 Button Hd. Cap Screw 16−28 Hex Nut 16−36 Nylock Hex Nut (page I.V. Pole Assembly 1211−310−112 I.V. Pivot Back to Table of Contents...
  • Page 65 1211−211−10 Optional 3−Stage IV Pole Assembly Item Part No. Part Name Qty. 7−4 Truss Hd. Machine Screw 26−76 Roll Pin 52−17 Spacer 1211−210−31 2nd Stage Assembly 926−400−162 Spacer (page 3rd Stage Assembly 1001−161−23 Base Tube 1010−59−16 I.V. Hook 1010−61−14 Collar (page I.V.
  • Page 66 3−Stage I.V. Pole 3rd Stage Assembly Assembly part number 1211−110−32 (reference only) NOTE Item F, part number 1010−61−18 is left hand thread. When removing it, turn clockwise to loosen it. Item Part No. Part Name Qty. 31−21 Ball 38−303 Compression Spring 1010−61−13 Ball Retainer 1010−61−16...

  • Page 67: Fowler X−Ray Cassette Assembly

    1061−23 Optional Fowler X−Ray Cassette Assembly Item Part No. Part Name Qty. (page Cassette Tray Assembly 1061−23−13 Latch Bracket, Right 1061−23−14 Latch Bracket, Left 1061−23−16 Pivot Bracket, Right 1061−23−17 Pivot Bracket, Left 25−172 Rivet 1061−50−162 Foot Support Ramp Back to Table of Contents...
  • Page 68 1061−23−10 Optional X−Ray Cassette Tray Assembly Item Part No. Part Name Qty. 1061−23−12 X−Ray Cassette Tray 1061−23−21 Spring Rod 1020−23−26 Spacer 1061−23−24 Release Handle 715−1−333 Release Rod Stop Sleeve 1061−23−19 Adjustment Knob 1061−23−18 X−Ray Adjustment Bracket 1061−23−15 Spacer 25−120 Rivet 1061−23−27 Tubing Back to Table of Contents...

  • Page 69: Upright Oxygen Bottle Holder Assembly

    1020−130 Upright Oxygen Bottle Holder Ass’y Item Part No. Part Name Qty. 27−30 Hair Pin Cotter 1020−30−111 Upright Bottle Holder 1020−30−117 Specification Label Back to Table of Contents...

  • Page 70: Foot Board/Chartholder Assembly

    0785−045−500 Foot Board/Chartholder Assembly BACK FRONT Item Part No. Part Name Qty. 0785−045−402 Push/Pull Label 0785−045−501 Foot Board Label 0785−045−511 Chartholder 0785−045−512 Foot Board Back 0785−045−513 Foot Board Front 0785−045−514 Small Standoff 0785−045−515 Large Standoff 0946−029−010 Support Weldment Back to Table of Contents...
  • Page 71 1061−70 Optional C−Spine Cassette Holder Assembly 1061−30−20 Litter Frame (Head End) Item Part No. Part Name Qty. 3−41 Hex Hd. Cap Screw 16−118 Hex Nut (page Support Pole Assembly 1061−70−18 Identification Label (page Storage Bracket Ass’y 25−181 Rivet Back to Table of Contents...
  • Page 72 1010−70−10 Optional C−Spine Support Pole Assembly Item Part No. Part Name Qty. 1010−70−33 Support Tube Cap 26−6 Roll Pin 1010−70−34 Support Arm Weldment 1010−70−42 Cassette Holder Weldment 1010−70−50 Adjustment Tube Weldment 1010−70−30 Base Tube Weldment 1010−70−45 Knob 25−55 Pop Rivet 1010−70−44 Pivot Pin 26−5...
  • Page 73 1061−700−1 Optional Waste Basin Holder Assembly Assembly part number 1061−120−000 (reference only) Back to Table of Contents...
  • Page 74 1061−700−1 Optional Waste Basin Holder Assembly Item Part No. Part Name Qty. 946−1−155 Bumper 25−79 Blind Rivet (page Holder Assembly 1061−120−33 Abrasion Resistant Pad 7900−1−102 2” Velcro Pile 6” Back to Table of Contents...
  • Page 75 1061−120−32 Holder Assembly Item Part No. Part Name Qty. 4−204 But. Hd. Cap Screw 14−2 Nylon Washer 22−10 Drive Pin 52−824 Nyliner 1061−120−24 Left Hoop Pivot 1061−120−25 Right Hoop Pivot 1061−120−29 Left Pivot Support 1061−120−30 Right Pivot Support 1061−120−20 Hoop Weldment 14−21 Nylon Washer Back to Table of Contents...

  • Page 76: Calf Support Mounting Brackets

    1061−130 Optional Calf Support Mounting Brackets Item Part No. Part Name Qty. 4−198 But. Hd. Cap Screw (page Calf Support Mount Assembly Back to Table of Contents...

  • Page 77: Calf Support Mount Assembly

    1061−130−1 Optional Calf Support Mount Assembly Item Part No. Part Name Qty. 1061−120−2 Plastic Knob 1061−120−1 Calf Support Mount Back to Table of Contents...

  • Page 78: Calf Rest Assembly

    1061−40−35 Free Standing Calf Rest Assembly Item Part No. Part Name Qty. 1060−001−155 Ball Post 4700−041−010 Calf Rest Cover Ass’y 5000−240−171 Calf Support Weldment 8800−200−800 Spiral Retaining Ring 0001−097−000 Flat Soc. Hd. Screw 0013−024−000 Internal Tooth Lock Washer 8805−906−900 Leg Rest 8806−124−800 Leg Support Ring 0024−044−000...
  • Page 79 1061−40−36 (2) Free Standing Calf Rest Back to Table of Contents...

  • Page 80: Defibrillator Tray Assembly

    0785−045−200 Defibrillator Tray Assembly Strap Securing Detail Item Part No. Part Name Qty. 0002−044−000 Round Hd. Machine Screw 0025−055−000 Rivet 0029−008−000 Dual Lock 0029−010−000 Dual Lock 0785−045−201 Defib Tray Label 0785−045−402 Push/Pull Label 0785−045−403 Weight Capacity Label 0785−045−204 Tray Support 0785−045−207 Tray 0785−045−208...

  • Page 81: Serving Tray Assembly

    0785−045−700 Optional Serving Tray Assembly Item Part No. Part Name Qty. 0785−045−701 Serving Tray Label 0785−045−704 Flat Hd. Torx Screw 0785−045−705 Serving Tray Top 0785−045−706 Serving Tray Pinion 0785−045−710 Serving Tray Slider 0785−045−715 Serving Tray Cover 0785−045−403 Weight Capacity Label Back to Table of Contents...

  • Page 82: Foot Board/Serving Tray Holder

    0785−045−800 Optional Foot Board/Serving Tray Holder Item Part No. Part Name Qty. 0025−079−000 Rivet 0785−045−402 Push/Pull Label 0785−045−801 Serving Tray Holder Label 0785−045−805 Foot Board 0785−045−806 Front Plate 0785−045−810 Foot Board Support Weldment 0946−001−155 Bumper 0025−133−000 Dome Head Pop Rivet Back to Table of Contents...

  • Page 83: O2 Bottle Retainer Assembly

    1040−10−90 Optional O@ Bottle Retainer Assembly Base Hood Item Part No. Part Name Qty. 1040−10−91 Bottle Retainer 1040−10−92 Scrulok Fastener Back to Table of Contents...

  • Page 84: Mattresses

    Mattresses and Siderail Pads Head Pad Thigh Pad Mattress, 3” Thick x 26” Wide, Standard ......part # 1061−326−100 Mattress, 4”...

  • Page 85: Warranty

    Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective. If re- quested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to Stryker’s factory.

  • Page 86: Return Authorization

    Stryker will perform all service during regular business hours (9−5) * Replacement parts and labor for products under PM contract will be discounted. ** Does not include any disposable items, I.V. poles (except for Stryker HD permanent poles), mattresses, or damage re- sulting from abuse.
  • Page 87 European Representative Stryker EMEA RA/QA Director Stryker France ZAC Satolas Green Pusignan Av. De Satolas Green 69881 MEYZIEU Cedex France 3800 E. Centre Ave., Portage, MI 49002 (800) 327−0770 www.stryker.com JH 01/07 1061−090−002 REV R...

Table of Contents