Steelcase Light Retrofit - Flex Personal Spaces Manual page 12

®
By hand, insert the tip of the Y in that hole and then
press the Y into the upholstery holder grooves (16a).
Then fully insert the Y with a putty knife (16b).
Install all 9 Y in a similar manner working
from the center outwards (A, B, C, etc.). See
details on step 15.
16a
Upholstery
Holder
grooves
Y tip
Y
Upholstery Holder
16b
Putty Knife
Note: As Y's are inserted, ensure
seam alignment remains true
Initial Y assembly
Sock
Y
Complete Y assembly
Doc # 160813 Rev A
Page 12 of 60