Before First Use; Daily Use - Zanussi ZOP37902 User Manual

Hide thumbs Also See for ZOP37902:
Table of Contents

Advertisement

Available languages

Available languages

BEFORE FIRST USE

WARNING! Refer to Safety chapters.
INITIAL CLEANING
Remove all accessories and removable shelf
supports from the appliance.
Refer to "Care and cleaning" chapter.
Clean the appliance before first use.
Put the accessories and the removable shelf
supports back to their initial position.
SETTING THE TIME
After the first connection to the mains, all symbols
in the display are on for some seconds. For the
subsequent few seconds the display shows the
software version.
After the software version goes off, the display
shows
and "12:00". "12" flashes.
1. Press
or
to set the current hour.
2. Press
to confirm. This is necessary only
when you set the time for the first time. Later
the new time will be saved automatically after 5
seconds.
The display shows
flashes.

DAILY USE

WARNING! Refer to Safety chapters.
RETRACTABLE KNOBS
To use the appliance, press the control knob. The
control knob comes out.
and the set hour. "00"
3. Press
or
to set the current minutes.
4. Press
to confirm. This is necessary only
when you set the time for the first time. Later
the new time will be saved automatically after 5
seconds.
The display shows the new time.
CHANGING THE TIME
You can change the time of day only if the oven is
off.
Press
again and again until the indicator for the
time of day
flashes in the display.
To set a new time, refer to "Setting the time".
PREHEATING
Preheat the empty appliance to burn off the
remaining grease.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
ACTIVATING AND DEACTIVATING THE
APPLIANCE
It depends on the model if your
appliance has knob symbols,
indicators or lamps:
The indicator comes on when the
oven heats up.
The lamp comes on when the
appliance operates.
The symbol shows whether the
knob controls the oven functions or
the temperature.
1. Turn the knob for the oven functions to select
an oven function.
2. Turn the knob for the temperature to select a
temperature.
and the maximum
and set the maximum
33

Advertisement

Table of Contents
loading

Table of Contents