Chapter 3: First Time Setup; Overview; Thecus Setup Wizard - Thecus N5200B PRO User Manual

Hide thumbs Also See for N5200B PRO:

Table of Contents

Chapter 3: First Time Setup

Once the hardware is installed, physically connected to your network, and

powered on, you can configure the N5200PRO so that it is accessible to your

network users. There are two ways to set up your N5200PRO: using the Thecus

Setup Wizard or the LCD display. Follow the steps below for initial software

setup.

The handy Thecus Setup Wizard makes configuring N5200PRO a snap. To

configure the N5200PRO using the Setup Wizard, perform the following steps:

1. Insert the installation CD into your CD-ROM drive (the host PC must be

connected to the network).

2. The Setup Wizard should launch automatically. If not, please browse your

CD-ROM drive and double click on Setup.exe.

NOTE

3. The Setup Wizard will start and automatically detect all Thecus storage

devices on your network. If none are found, please check your connection

and refer to

4. Select the N5200PRO that you like to configure.

5. Login with the administrator account and password. The default account

and password are both "admin".

For MAC OS X users, double click on Thecus Setup Wizard 1.1.6.dmg

Chapter 8: Troubleshooting

for assistance.

Table of Contents

N5200br pro