Table of Contents
Advertisement
Checking System Status
After making connections on the N5200PRO and powering up, check whether the
system status is normal or has trouble by observing indicators on the front panel
and hard disk trays.
System Status Normal
The system status is normal if:
The WAN and LAN LEDs glow
1.
green (assuming both are
connected).
The Power LED on the Front
2.
Panel glows blue.
The HDD Power LED on each
3.
HDD tray glows blue (assuming
all disks are installed).
The default IP address of the
4.
WAN port is 192.168.1.100.
System Trouble
The system has trouble if:
1. System Busy LED glows orange.
2. Any of the HDD Access/Error LED
glows red.
If the system has trouble, please refer
to
Chapter 8:
Troubleshooting.
WARNING
There are no user serviceable parts inside the N5200PRO. Please
contact your distributor for service.
15
Advertisement
Table of Contents
