Table of Contents
Advertisement
Pre-assembled System
Feed Water Adapter
(Model: AFW43)
Parameter
Inlet Water Pressure
Inlet Water Temperature
Maximum Inlet Water TDS Value
Filtered Water Flow Rate
• If the inlet water pressure is less than 20 psi, a booster pump is needed. If the inlet water
pressure is higher than 80 psi, a pressure regulator (Model: APR70) is required.
• Do not use this system with microbiologically unsafe water or which has been potentially
inadequately disinfected.
• This system is designed to be used on a cold supply only and kept away from freezing
environments.
• The installation must comply with applicable local plumbing codes and/or regulations.
• Choking hazard. Small parts are included in the package. Please keep the package out of the
reach of small children at ALL times.
If you have any questions or concerns during the installation, please contact us at
support@123filter.com or visit our help page at 123filter.com/support
www.123filter.com
Packing List
Plumber's Tape
Tubing and Spare Parts
Product Features
| (678) 261-7611 |
Drinking Water Faucet
Specification
20 - 80 psi
40 - 100 °F
1000 ppm
0.56 GPM @ 45 psi
support@123filter.com
Faucet Hanger
Page 2
Advertisement
Table of Contents
