Table of Contents
Advertisement
Ice Maker Connection Kit (Model# ICEK)
The iSpring ICEK can be purchased separately to feed water to your refrigerator for crystal clear
ice cubes and great tasting water. It can be easily installed to connect the CU-A4 system to the ice
maker or water dispenser of your fridge.
Tubing (Model# T14B or T14W)
1/4'' food-grade tubing in a 50' roll, which is good to use for tubing replacement and extension as
needed.
Top Mount Faucet Installation Kit (Model# AIG1)
A US patent tool-free product for countertop drinking water faucet installation. It works great for
countertops with 1'' - 1 ½'' (D) holes and also fits standard 7/16'' drinking faucet stem. It is highly
recommended that you watch the video ''How to install a drinking water faucet WITHOUT
reaching under sink | iSpring AIG1 Installation Kit'' on YouTube.
Symptom
1. No water or water pressure < 20 psi.
No water from
2. Incorrect tubing connection.
the faucet
3. Drinking faucet is closed.
1. Water pressure lower than 20 psi.
Slow water
2. Filters are due for replacement.
flow
3. 1
4. Water supply is not fully opened.
Cloudy water
There are tiny air bubbles in the
after
treated water, causing water to appear
installation
cloudy.
1. Tubing is not fully push into the
Leaking from
quick fitting
the system
2. The O-ring on the fitting is not
creating a seal.
www.123filter.com
Optional Add-on
Troubleshooting
Reason
st
stage is clogged by sediments.
| (678) 261-7611 |
Resolution
1. Check water source. Use a booster
pump if needed.
2. Check the tubing connection.
3. Open the faucet.
1. Use a booster pump if needed.
2. Replace the filters if needed.
3. An additional pre-filter is needed.
4. Open the water supply to the system.
The bubbles are harmless and will
disappear as the system clears itself.
1. Make sure the tubing is pushed in a full
1/2" into the fitting.
2. Replace the O-ring.
support@123filter.com
Page 8
Advertisement
Table of Contents
