AGFA Drystar 4500 Plug & Play Installation Manual page 14

C
12
Load film in the upper input tray
The films delivered with the printer are
intended for test purposes only.
Load 8x10" test films in the upper tray and
10x12" test films in the lower tray.
2
Open the 8x10" film pack.
Check
the icons
on the
film bag
before
loading films.
4
Close the upper input tray (verify that
film is under the retainers).
14/18
1
Open the upper input tray.
3
Place the film pack in the tray.
5
Place the correct film sticker.
This side down
2805F EN 20050128