Table of Contents
Advertisement
9
Install blocking plate and belt
1
Take 7 mm hex key.
3
On the left, pull the belt [1] over the
pulley [2].
2
4
Slowly turn the pulley by hand to assist
the belt.
2805F EN 20050128
2805F EN 20050128
2
On the right, loosen and refasten the
red blocking plate.
1
Turn the pulley only slowly to assist the
If the printer will not be used for a
prolonged time (at least four weeks), it is
recommended to remove the belt during this
mounting of the belt.
period.
B
11/18
Advertisement
Table of Contents
