F4 Check Weighing Configurations - Excell H3 Series User Manual

EXCELL PRECISION CO., LTD.

3-1 F4 Check Weighing Configurations

 If hold mode (
Press
Press
Preset "LO value"
(LO value  10d)
Press and
key to set " LO value"
E.g. LO value = 2 kg
Press key
.
Preset "HI value"
(HI value  LO value)
Press and
key to set "HI value"
E.g. LO value = 2.5 kg
Press key
Preset "Beeper value"
Press and
key to set "HI value"
E.g. Beeper value = 22
Press key
L 1

Press key
0201813X
) is set, accessing to F4 is denied.
or key to select F4
key Press
to clear HI, OK, LO values
kg
.
kg
.
kg
kg
.
kg
kg

key for 5 times
key = Increase the flash value by one (from 0
to 9)
key = Confirm key

A
A  0 = After stable, the beeper beeps and the
indications are on
1 = After stable, the beeper beeps; whether
stable or not, the indications are on.
2 = whether stable or not, the beeper beeps
and the indications are on.
3 = open warning device: when the weight is
higher than HI value and the weight is
stable, LCD is on and Relay Card open.
B 
0 = No beep
1 = OK (when the weight is between Low limit
& High limit.), the beeper beeps.
2 = When the weight is under or equal to Low
limit (must be over 10d) & over or equal
to High limit, the beeper beeps.
 LCD indication description:
  

10d Low limit value High limit value
Relay low output setting:
to set 0~1; Default setting: 0. L 1  relay low output,
L 0  relay low no output.
12
.
Press key

B
  

Use
ZSME300000366
kg
and