1- INSTALLATION - Check if the voltage of the outlet corresponds to that warmer display case (127 V or 230 V ). - Ground wire : if your outlet is not grounded consult a professional electrician to do so. - Set the thermostat to “o” (zero=off) - Plug in and make sure that it is well adjusted.
These models also have the distinction of being composed of a master switch ( turns on/off the power suplly). 3D visual and water drawer. 4-CLEANING FOR SAFETY MEASURES CLEANING MUST ALWAYS BE DONE WHEN THE HOT WARMER DIPLAY CASE IS COLD AND UNPLUGGED. DO NOT USE A WATER JET TO DO THE CLEANING OF THE EQUIPMENT.
6-TECHNICAL SPECIFICATION VOLTAGE POWER SIZE FREQUENCY NET WEIGHT SHIPPING WEIGHT MODEL (Hz) (inches) (lb) (lb) PD3TS 18" 7/64 x 18" 7/64 x 31" ½ 715,5...
All products held at non-commercial facilities or domiciles, must be taken or shipped, 7-General Safety Practices shipping charges prepaid, either to SKYFOOD's facility or a SKYFOOD's designated service company ("Service Company"). Products held at commercial facilities and weighing less than seventy (70) lbs. must be taken or shipped, shipping charges are prepaid, either IMPORTANT to SKYFOOD's facility or to a Service Company.
Page 8
IMPORTANT Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON. For questions or assistance with products FLEETWOOD by SKYMSEN and SKYMSEN, Be sure to be familiar with the instructions and that you have well understood all call SKYFOOD EQUIPMENT Toll Free : 1-800-503-7534, 24h Customer support, or visit information contained in this manual.
Need help?
Do you have a question about the PD3TS and is the answer not in the manual?
Questions and answers