Page 3
SUMMARY Specifications Transportation Installation Operation Cleaning and maintenance Trouble shooting 7- General safety practices 8- Electrical Diagram...
Page 4
1. Specifications: Characteristcs Unit CT-300 Electric Voltage Frequancy Fan Power Motor Power Heat Power Power 1.94 × Unit Size Inches 14”19/32 x 16” 9/16 x 14” 31/32 Net Weight Shipping Weight 2. Transportation: During transportation, the machine should be taken care for the strong vibration. The package cannot be put upside sown.
Page 5
4. Operation: (1) The adjustment of the train net: Before shipment we have adjusted well the train net. But after some times operation, you can adjust by yourself if necessary. You can loose the bolt by the shaft and move the bearing base to adjust the train net. (2) Turning on the power and press down the power switch”1”and the lamp is on.
Page 6
No extended warranties for third party products. There are no other express warranties or conditions othe r than the one offered by each manufacturer for 1.turn on the power and turn on products sold by SKYFOOD, not under the FLEETWOOD by SKYMSEN and 1.thermostat breaks down 1.replace the thermostat SKY MSEN brand.
Page 7
Un less otherwise specified, new FLEETWOOD by SKYMSEN and SKYMSEN products, excluding accessories, sold by SKYFOOD EQUIPMENT, LLC. (“SKYFOOD”), for use only The following safety instructions are addressed to both the operator of the in the continen tal United States (collectively, “Products” or singularly, “Prod uct”), a re machine as well as the person in charge of maintenance.
Page 8
SAFETY PROCEDURES AND NOTES BEFORE SWITCHING ON 8- Electrical Diagram IMPORTANT Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON. Be sure to be familiar with the instructions and that you have well understood all information contained in this manual. If you have any question contact your supervisor or your nearest Dealer.
Need help?
Do you have a question about the Fleetwood CT-300 and is the answer not in the manual?
Questions and answers