Table of Contents
Advertisement
Events
Back to Contents
Make calls
Tapping a contact's number automatically brings up the telephone
view for your end device, with the relevant contact's number pre-
dialled. To make the call, you need to tap your end device's call
button.
Important
The pre-configured contacts – emergency and police
– are only to be used in case of emergency.
Event overview
When calling up the event list, the 100 most recent events are
displayed.
To view older events, use the search function. The Smartvest
alarm panel stores a maximum of 1000 entries.
Note
Camera events will be loaded directly from the
camera into the event overview and updated.
Depending on the network connection, it may take
several minutes for a new video to be displayed.
Note
Motion detector events are not listed in the event
overview.
Use test mode to carry out the function test.
Section 1.4. Motion Detector)
Colour code
Components which have triggered an alarm status are marked red
in the event overview.
Components not transmitting a signal to the Smartvest or whose
battery is dead are marked yellow in the event overview.
Export
Tap the export symbol
the current event overview on your end device in a text file.
Note:
The text file is stored on your smartphone. You can then
find it:
On Android operating systems:
In a separate file explorer under the "Smartvest" directory
On iOS operating systems:
51
in the bottom left-hand corner to save
Back to Contents
English
(See
Advertisement
Table of Contents
