Installation with adhesive pads
1. Please clean the areas where you would like to attach the adhesive pads first.
2. Affix the two adhesive pads to the underside of the Vibration Detector.
3. Secure the Vibration Detector in the desired position.
Installation with screws
1. Drill one of the supplied screws into the installation location (for the keyhole fitting on the back plate)
2. Attach the Vibration Detector and fix it in place with the second screw.
Further information on the Vibration Detector
Description
Back to Contents
1
2
Programming
Removal
Configuration
41
English
Technical data
Back to Contents