Table of Contents
Advertisement
Back to Contents
Select
Select your Smartvest from the list. If you want to link the
Smartvest from another network or the Smartvest is not found,
enter the DID manually. All further entries must then also be made
manually.
Device security code
The standard security code "123456" is already stored. When
setting it up for the first time, press "Next". If the device security
code has already been changed, enter the correct code here.
Standard security code: "123456"
When logging in for the first time, you will asked to
change the device security code.
Note
You can change the security code in the settings.
If you have already changed the security code, you
can enter this here manually before tapping "Next".
Name assignment, room and location information
Assign a name to the Smartvest. The name "Smartvest" will be
stored initially.
Open the room list and select a room where the Smartvest is
mounted. Tap the arrow
To display weather information, tap the town row and search for
your location using the place name or postcode and select your
location from the results returned.
Note
The location data is used solely to ascertain weather
information.
Note
The location data and Smartvest name are stored in
the Smartvest alarm panel and can only be adjusted
or changed in the following cases:
-
When the system is set up for the first time
25
to return to the previous window.
Back to Contents
English
Advertisement
Table of Contents
