Table of Contents
Advertisement
FUSG35010 Wireless Door Bell
1
Loudspeaker
2
LED
3
Volume button
4
Tune button
5
Pair button
Bracket
6
slot
Battery
7
operation
Further information on the Wireless Door Bell
Programming
Back to Contents
1
3
4
5
2
Door bell loudspeaker
Lights up while playing a tune
High (approx. 80 dbA)
Medium (approx. 70 dbA)
Low (approx. 60 dbA)
Mute
For testing the tune: (The actual configuration takes place in the Smartvest App)
Tune 1–4 = door bell tune
Tune 5 = Alarm tone (in the event of an alarm only)
Button for manual pairing with the Smartvest (alternative)
These slots are for fixing the door bell to the wall.
3 x AA (1.5 V) batteries as power supply
(approx. 1 year battery life)
The Smartvest App warns you when the battery is low. Follow the instructions
in the app.
Changing the battery
Start by switching the Smartvest alarm panel to maintenance mode (part of
the battery changing process in the app). Open the battery compartment.
Remove the dead batteries and insert new AA (1.5 V) batteries. Make sure
the polarity is correct (+/-).
Removal
Installation
6
7
Configuration
22
English
Technical data
Back to Contents
Advertisement
Table of Contents
