Noraxon ultium EMG Quick Start Manual page 10

Insole Smart Lead Quick Start Guide
Step 3
Select to Calibrate (normalize) the insole
pressure data to static standing pressure.
Continue to the next step by selecting
Measure.
Step 4
After checking for normal signal display, you
are ready to record a measurement. Select
Record at the top left of the screen and begin
your protocol.
After completing your record, select Stop and
Save. Save the record as the name of your
configuration, or type in a new name. After this,
save your record or Discard & measure
again.
(Rev A)
10