Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
• Press the speed key to select the
appropriate speed.
FAN MODE
• Select this mode via the device's control
panel or with the remote control, the
indicator light in this mode will light
up.
• In this case the device will only expel
air and will operate in the fan mode.
• Select the desired speed (High/Low).
• The temperature cannot be selected in
this mode.
DRY MODE/ DEHUMIDIFYING MODE
• Select this mode via the control panel
of the device or with the remote control,
the indicator light in this mode will
light
• This mode has the particularity of
regulating the temperature of the
room automatically and acting as a
dehumidifier.
• Remove the water plug (see right),
insert one end of the pipe into the drain
hole and the other end into the water
tank.
• If the temperature is equal to or greater
than 17
(or 62 ° F), the compressor
turns on. Thereafter, it is controlled
according to the following rules: the
compressor is turned off when Ta ≤
15° C (or 59° F) and restarted when the
temperature rises to Ta ≥ 17° C.
• In this case, the speed cannot be
adjusted and it always works at low
speed by default.
• The temperature cannot be selected in
this mode either.
TIMER MODE
• When the device is on standby, press
the timer key to set the power on time.
Press the Up and Down keys to set the
power on time (0 ~ 24 H).
• The timer indicator light will light up
when this option is in use.
• At any time when the device is in
24
operation, press the timer key to remove
the timer function. Use the up and
down arrows to set the timer to 0. If you
want to set the shut-off time, press this
button while the device is in operation
and set the shut-off time.
SLEEP MODE
• In cold mode, press "SLEEP" on the
remote control; or press Timer and
the down button on the control panel
simultaneously;
• The speed in this case cannot be
adjusted manually. In this mode, the fan
will be forced to work at low voltage.
• The low speed indicator light will come
on.
• If you want to cancel, press the SLEEP
button on the remote control or the
Timer buttons and the down button on
the control panel again.
WIFI FUNCTION
To control the fan via WiFi just follow the
steps below (see picture 08 on page 8):
• Download the "Smart Life" app from the
Play Store (Android) or App Store (iOS),
or scanning the QR code (see picture 08
(J) on page 8):
• If you don't have an account, register or
log in via SMS verification.
• To connect the AC device to the mobile
device, press the "SPEED" button for
7 seconds to enter the WiFi-connect
mode.
• Open Smart Life app and tap "+" in the
upper right to add a new device through
the network.
• Ensure the device's indicator light
rapidly flashes (2 times per second).
• Select Wi-Fi network (note: network
must be 2.4Ghz band) and enter the
password (see picture 08 (K) on page 8).
• The device will commence the pairing
process and connect to the app (see
picture 08 (L) on page 8).
• After
successfully
devices, the smart AC will be shown on
the home page. Tap to enter its control
configuring
the
Advertisement
Table of Contents
