Advertisement
Power Strip
The T33276 features a pre-installed power strip
with (4) 5-15 outlets and (2) USB ports conveniently
located for easy access. The included power strip
has the following ratings:
Max. Amperage Load ..................................12A
Max. Voltage .............................................. 125V
Cycle ..........................................................60 Hz
Max. Wattage ..........................................1500W
USB Output ............................ 5VDC, Max. 2.1A
Plug the provided power cord into the power strip
socket (see Figure 12).
Power Strip
Figure 12. Power strip and plug location.
• Do not connect to plug receptacle via
extension cords or in series with other
power strips.
• Keep electrical connections clear of flam-
mable materials.
• Keep electrical connections dry. Do not
use in damp or wet conditions.
• Do not connect devices to power strip
that draw more than listed power strip
rating. Equipment must be used in accor-
dance with any instructions or labeling.
• Power strips are designed for use with
low-powered loads, such as battery char-
gers. Not designed for use with high-
powered loads, such as space heaters or
microwaves.
• Do not run cord under floor coverings or
where it may be tripped over.
• Not meant for outdoor use.
• Prevent unauthorized use by children or
untrained users.
Model T33276 (Mfg. Since 4/22)
110V Circuit Requirements
This tool chest is prewired to connect to a power
supply circuit that has a verified ground and
meets the following requirements:
Nominal Voltage .................... 110V, 115V, 120V
Cycle ..........................................................60 Hz
Phase ........................................... Single-Phase
Power Supply Circuit ......................... 15 Amps
A power supply circuit includes all electrical equip-
ment between the breaker box or fuse panel in the
building and the power strip. The power supply
circuit used for this power strip must be sized to
safely handle the full-load current drawn from the
power strip for an extended period of time. (If this
power strip is connected to a circuit protected by
fuses, use a time delay fuse marked D.)
Socket
Grounding & Plug Requirements
This power strip MUST be grounded. In the event
of certain malfunctions or breakdowns, grounding
reduces the risk of electric shock by providing a
path of least resistance for electric current.
Power Cord
w/Plug
This power strip is equipped with a power cord
that has an equipment-grounding wire and a
grounding plug. Only insert plug into a matching
receptacle (outlet) that is properly installed and
grounded in accordance with all local codes and
ordinances. DO NOT modify the provided plug!
Electrocution, fire, shock,
or
equipment
may occur if power strip
is not properly grounded
and connected to power
supply.
GROUNDED
5-15 RECEPTACLE
Grounding Pin
5-15 PLUG
Neutral Hot
Figure 13. Typical 5-15 plug and receptacle.
damage
-5-
Advertisement
