BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Long Bolt Lock Washer (M8 x 60mm) (8.5 x 13mm) Allen Key Flat Washer (M4 x 30mm x 110mm)
Page 4
STEP 2 Unlock the table top from both sides underneath the top as shown below. Pull the two parts of the table top apart. ITEM NO.: T-406018XB Printed in Vietnam ISSUED JUN 04, 2019 - 4 -...
Page 5
STEP 3 Unfold two aprons of the leaf and place the butterfly leaf in the center of the open table top, as shown below. Note: The metal swivel bar bracket is very flexible and a slight twist of one half of the leaf can get the leaf into alignment.
Page 6
STEP 4 Push the table top closed. Lock the mechanism underneath two sides of the table top as shown below. ITEM NO.: T-406018XB Printed in Vietnam ISSUED JUN 04, 2019 - 6 -...