Related Manuals for Unfinished Furniture of Wilmington T-4818XBT
Summary of Contents for Unfinished Furniture of Wilmington T-4818XBT
- Page 1 ASSEMBLY INSTRUCTIONS Description : CANYON PEDESTAL EXTENSION TABLE Item No. : T-4818XBT AND T-4818XP ITEM NO.: T-4818XBT AND T-4818XP Printed in Vietnam ISSUED AUG 08, 2015 THIS ITEM IS PACKED IN TWO CARTONS - 1 -...
-
Page 2: Before Assembly
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch ITEM NO.: T-4818XBT AND T-4818XP Printed in Vietnam ISSUED AUG 08, 2015 THIS ITEM IS PACKED IN TWO CARTONS - 2 -... -
Page 3: Hardware List
Short Bolt (8.5x22mm) (M8x45mm) Allen Key Long screw (4x80mm) (M4x40 mm) NOTE: HARDWARE IS PACKED IN CARTON T-4818XP ITEM NO.: T-4818XBT AND T-4818XP Printed in Vietnam ISSUED AUG 08, 2015 THIS ITEM IS PACKED IN TWO CARTONS - 3 -... - Page 4 Attach the leg (D) to the pedestal (B) with long bolts (1) and washers (2) and (3), as shown below. Tighten with the Allen key (5). STEP 2 Insert the pedestals (C) to the pedestal (B) as shown below. ITEM NO.: T-4818XBT AND T-4818XP Printed in Vietnam ISSUED AUG 08, 2015 THIS ITEM IS PACKED IN TWO CARTONS...
- Page 5 Carefully put the pedestal block on the bottom side of the table top (A), attach the top to plate with short bolts (4) and washers (2) and (3) as shown below .Tighten with the Allen key (5). ITEM NO.: T-4818XBT AND T-4818XP Printed in Vietnam...
- Page 6 Place the butterfly leaf in the center of the open table top. Push the table top closed. Lock the mechanism underneath 2 sides of the table top as shown below. ITEM NO.: T-4818XBT AND T-4818XP Printed in Vietnam ISSUED AUG 08, 2015...