Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
WARNING!
Serious or fatal injuries can occur from furniture tip over. Use tip over restraint
(steel band included) to secure this product to the wall.
ITEM NO.: SV-40A AND SV-40B
REVISED MAY 31, 2019
Description
Item No.
: PREVAIL SERVER
: SV-40A AND SV-40B
THIS ITEM IS PACKED IN TWO CARTONS
- 1 -
Printed in Vietnam
Advertisement
Related Manuals for Unfinished Furniture of Wilmington SV-40A
Summary of Contents for Unfinished Furniture of Wilmington SV-40A
- Page 1 (steel band included) to secure this product to the wall. : PREVAIL SERVER Description : SV-40A AND SV-40B Item No. ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS - 1 -...
-
Page 2: Before Assembly
Protect the surface of the product with cloth if you are using any product with rubber feet or base. ASSEMBLY TOOLS REQUIRED NOT INCLUDED ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS... - Page 3 Description Sketch Description Sketch Bottom panel Leg frame Crossbar (L-R) Shelf side Shelf center (L-R) ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS - 3 -...
- Page 4 Side panel (L-R) (L-R) Joint connector Center Door block (L-R) Side Door Side back (L-R) panel Center back panel ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS - 4 -...
-
Page 5: Hardware List
Allen Key L-bracket (M4 x 30mm x 110mm) NOTE: HARDWARE IS PACKED IN CARTON SV-40B. NOTE: WARNING LABEL (INCLUDED) ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS - 5 -... - Page 6 STEP 2 Attach bottom panel (B) to vertical panels (G) with bolts (1), and washers (4) and (5) as shown below. Tighten with Allen key (12). ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS...
- Page 7 STEP 4 Attach leg frames (C) to bottom panel (B) with bolts (3), and washers (4) and (5) as shown below. Tighten with Allen key (12). ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS...
- Page 8 Tighten with Allen key (12). Attach side panels (H) to top (A) and bottom panel (B) with brackets (11) and screws (7) as shown below. Tighten with a screwdriver. ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019...
- Page 9 STEP 8 Attach doors (J) and (K) to the unit with screws (7) as shown below. Tighten with a screwdriver. ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019 THIS ITEM IS PACKED IN TWO CARTONS...
- Page 10 STEP 9 Insert brackets (8) into the unit as shown below. Place shelves (E) and (F) on the brackets and attach with screws (7). Tighten with a screwdriver. ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019...
- Page 11 Drill 1/8-inch (3mm) diameter hole(s) into the wood stud(s) located in the wall, where you marked with the pencil. Properly attach steel bands to the wall with screws (9) and tighten screw(s) firmly into the wall. ITEM NO.: SV-40A AND SV-40B Printed in Vietnam REVISED MAY 31, 2019...
Need help?
Do you have a question about the SV-40A and is the answer not in the manual?
Questions and answers