Page 2
Description Sketch Description Sketch Flat washer Lock washer (2 x 8.5 x 19mm) (8.5 x 13mm) Hexagon nut Wrench (M8 x 13mm) (M13mm) ITEM NO.: T-4260XB Printed in Vietnam REVISED FEB 20, 2017 - 2 -...
Page 3
Attach legs (B) to the top (A) with washers (1), and (2) and nuts (3) as shown below. Tighten with the wrench (4). Note: The top of the legs have to be flush with the table top before fully tightening the bolts. ITEM NO.: T-4260XB Printed in Vietnam REVISED FEB 20, 2017...
Page 4
STEP 2 Unlock the table top from both sides underneath the top as shown below. Pull the two parts of the table top apart. ITEM NO.: T-4260XB Printed in Vietnam REVISED FEB 20, 2017 - 4 -...
Page 5
We use the flexible metal bar for this purpose, as a hardened metal would snap during transport or damage the under structure. ITEM NO.: T-4260XB Printed in Vietnam REVISED FEB 20, 2017...
Page 6
STEP 4 Push the table top closed. Lock the mechanism underneath two sides of the table top as shown below. ITEM NO.: T-4260XB Printed in Vietnam REVISED FEB 20, 2017 - 6 -...