Page 2
The ways of cleaning When cleaning, please turn off the power and pull the plug. 、 After use, please clean and wipe the body immediately. 、 GY-120 GY-120 Model 350*300*355MM Size 220Vor110V...
Page 3
二、 1 20 Operating Instructions Adjustment and placed the cup A : Adjust the shrapnel to a appropriate location by usingM6 L-typehex wrench (The cup put on the cup holder, then push the cup (with the cap) forward, if the shrapnel can press the cup tightly, then the shrapnel is at the appropriate location) A: When place the cup, place the cup bottom aligned the cupholder...
Page 4
1. After turning on the power supply, the power light is on, and the time indicator shows the stop time. (Factory default 15 seconds) 2. Put the cup (with liquid and cover the lid) on the cup holder, push the cup toward the machine.
Page 5
Fault Analysis and Treatment Check the Cases Cause of issue Approach contents Replacing the After pressed the Power problems Check the power power outlet start button, the machine did not Plug and socket Check the plug is Replace the plug work connection is bad loose or not...
Need help?
Do you have a question about the GY-120 and is the answer not in the manual?
Questions and answers