Install according to the following steps. The [MONITOR OUTPUT] terminal is use to confirm the images.
The LCD monitor, computer and projector are sold separately.
(supplied power cord)
Connect the [RGB OUTPUT] terminal
to a projector or display.
● The output of this unit is XGA, connect it to a compatible device.
● Commercially available D-sub 15 pin cable (below 3 m) is rec-
If necessary, connect the [MONITOR
OUTPUT] terminal to a monitor etc.
If necessary, connect the USB connec-
tor to a computer.
☞ Page 22 'Connecting to Computer via the USB Connector'
Connect to the AC power source with
the power cord supplied.
Turn on the power.