Adjusting the White Balance
Adjusting the White Balance Automatically
This unit is adjusted to display the natural colour. However, the white balance can be re-adjusted with the following steps.
Adjusting the White Balance Manually
Depending on the object, if the images appear reddish, bluish or the overall colour tone appears to be bad even after the
automatic white balance adjustment has been performed, adjust the colour balance manually.
NEGA POSI BW COLOUR
Place a piece of white paper on the
Adjust till the full screen becomes white.
Press the [WHITE BALANCE AUTO]
The white balance will be re-adjusted in about 5 seconds.
● The button indicator lamp will blink initially, and goes off once
the white balance adjustment has been completed.
Increase the red
Decrease the red
Increase the blue
Decrease the blue