Presenting Slide Films
Slide films with frame can be inserted directly into the camera head for presentation.
Use only slide films with mounting frame.
● Automatic brightness adjustment will be disabled whenever
● Under negative mode, pressing the [BRIGHT
● Under negative mode, pressing the [WHITE BALANCE] but-
If the slide film is inserted vertically, zooming in (enlarging) un-
til the mounting frame cannot be seen may cause the focus to
be out. In this case, set zoom to [OUT].
Place a piece of white paper on the
As the slide film makes use of the reflecting light from the stage
surface, place a highly reflective white paper (B4 size or A3 size)
on the stage.
Adjusting side illuminations
Adjust such that the stage surface is evenly lighted.
Insert the slide film
Adjust such that the portion of the object to
be captured occupies the full screen.
Adjust the brightness while looking at the
image displayed on the monitor.
Nega is selected. The indicator lamp blinks rapidly to indicate
that operation is not possible.
the images while pressing the [BRIGHT
] or [BLUE
] decreases the red or blue compo-
nent while pressing the [RED
the red or blue component.
Use the [FOCUS
] buttons to adjust the focus.
] button dims
] button brightens
] or [BLUE
] button increases